professional and best quality particle board making machine

professional and best quality   particle  board making machine    0086-13503826925

 the introductions of    particle  board making machine 

1.wood shavings preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported

to the chip bin, and then feed to the knifering flaker by which the chips are turned to flakes, then

the flake stored in wet flake bin.
2. Drying and sifting section
The flakes are discharged from the wet flake bin which are conveyed to the rotary dryer.
Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing,

and transported to surface dry wood shavings bin to be stored.
3.Glue stage 
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified

glue to achieve the uniform mixing and the sufficient sizing effect.
4.Paving and thermo forming section
The after sizing shavings are transported to the mechanical grading paving machines bythe belt

conveyor.and they are paved to the uniform flat slab. After pre-press, and loading conveyor,the rough

boards are sent to the installed hoistingcages,then the rough boards are pressed by the hot press

machine.
5. Post--processing section
The thermo foming boards are conveyed to the panel turnover machien to become cool,then the

boads are transported to the vertical and horizontal edge cutting machine by the cooling conveyor.
the material of     particle  board making machine 

the pictures  of    chipboard making machine 

 the product of    particle  board making machine