ERNiCu-7 welding wire

MONEL Filler Metal 60 is used for gas-tungsten-arc and gas-metal-arc, and submerged-arc welding of MONEL alloys 400, R404, and K-500. It is also used for surfacing of steel by the gas-metal-arc or submerged-arc processes. For certain gas-metal-arc conditions, a barrier layer of Nickel Filler Metal 61 is recommended. Submerged-arc welding with MONEL Filler Metal 60 is done with INCOFLUX 5 Submerged Arc Flux.

Weld metal deposited by MONEL Filler Metal 60 has properties similar to those of MOENL alloy 400. It has good strength and resists corrosion in many media, including sea water, salts, and reducing acids. The weld metal is not age hardenable and when used to join MONEL alloy K-500 has lower strength than the base metal.

Specifications

AWS A5.14 ERNiCu-7(UNS N04060)

ASME II, Part C, SFA-5.14, ERNiCu-7(UNS N04060)

ASME IX, F-No.42

BS 2901( NA33)

DIN1736 SG-NiCu30MnTi(2.4377)

(EN)ISO18274-SNi4060(NiCu30Mn3Ti)

Supply to these specifications available upon request

For manufacture to ASME III(NCA3800, NB2400), MIL and other specifications please refer your inquiry to the technical department prior to order placement.

Approvals

VdTUV 2114.01; 2165.01

Other approvals may be applicable, please confirm details of current scope of approvals with the technical department prior to order placement.

Limiting Chemical Composition

Minimum mechanical properties

Tensile strength, psi    70,000

                MPa    483

      Elongation, 4d%    30

Filler metals available on spool and in cut straight lengths in a variety of sizes selected from the following diameters:

Available Product Forms

Straight Lengths-915mm(36 in.) or 1000mm(39 in.)