AceFog water air cooling fogging machines for printing humidification

High Pressure Micro-mist Humidifier use high pressure piston pump to increase the water pressure up to 4-7Mpa and pressurized water through high pressure pipeline by professional nozzle to spray out, the 2-6 μm micro-mist water particles will enabling them to rapidly complete the vaporization absorbs heat from the air and spread, so as to complete air humidification and cooling purposes.

Advantages:

1. All intelligent control, without special maintenance.

2. 100m remote control function available.

3. Low noise.

4. No drip from the tube when powered off.

5. Super large water tank, made of stainless steel.

6. Distribution cabinets, control system, linkage, cistern is all-in-one machine.

7. 9 series main products, 1000 kinds of tie-in way.

8. Automatically self-cleaning nozzles.

9. The whole system service life can be as long as 8-10 years(nozzle and filter cartridge are not including)

Humidifier is mainly used in weaving cloth, cotton spinning, chemical fiber, bast fiber and other textile industry, as well as printing, papermaking, tobacco, chemical, edible fungi, artificial fog engineering, refrigeration storage etc.. As long as more than 500 square of space need to be humidified, no other using limits, a large capacity humidifier can control 800-3000 square meters.

Main Functions: 

Textile industry: humidification, moisture regain, anti-static, avoid yarn disconnection.

Paper mill industry: anti-static, dedusting, prevent paper wrinkle, improve paper quality.

Artificial fog program: dedusting, humidification, change microclimate, creating beauty.

Tobacco industry: prevent tobacco breakage, increase weight.

Fruit refrigeration storage: keeping fresh, good taste and weight.

The installation drawings:

  The applicable scope:

Medical device manufacturing humidification & humidity control:

In the increasingly competitive print market where return on investment really matters, humidity control is essential to maintain quality and productivity at all stages of production.

Paper and ink

Paper is very hygroscopic, which means it loses moisture rapidly when exposed to dry air. Sheet and web roll paper is typically produced and wrapped to stay in equilibrium with air with a relative humidity of 50±5%RH.

When the ambient humidity falls below this level, paper loses water to the environment from exposed surfaces, changing its shape, dimensions and physical properties. Below 40%RH, the movement of paper on paper and other surfaces generates electrostatic charges, attracting dust and making it difficult to handle. The problems are most pronounced in hot summers and cold winters, when the relative humidity can fall below 20%RH even in temperate climates.

Where water-based inks are used, a higher relative humidity of 55±5%RH is typically recommended, and some ink manufacturers recommend 60%.

Platemaking

When the protective film or paper is removed from plates, electrostatic charge is generated if the relative humidity drops below a threshold of 40%RH. This attracts dust and grit to an otherwise unblemished surface, makes handling difficult and also generates sparks. Maintaining an environment of 45%RH prevents this.

Digital printing

The paper problems experienced elsewhere in printing apply equally to digital printing but electrostatic problems associated with machinery can be a particular issue. To counter this, a relative of 50-55%RH is recommended.

Sheet fed offset

A dry press hall means the edges of unwrapped paper lose moisture rapidly. Tight edges result, making the paper curl, which causes misfeed, with misregister, dot doubling and creasing as the paper passes between blanket and impression cylinders.

Misfeed also occurs due to electrostatic build up, which also causes stacking difficulties coming out of the press. Printed work awaiting another pass continues to change, with misregister being a particular problem.

In dry air, work passing to finishing suffers from paper sticking and creasing due to electrostatic, and paper cracks on folds.

The impacts of dry air can be so severe that printing stops altogether. Maintaining a relative humidity of 50-55%RH in the press hall and bindery resolves these issues.

Web printing

If air is too dry in the paper store, laydown area and reel stand, the exposed edges of the paper rolls loose moisture and shrink.

On the web press, the paper is under greater tension at its edges than the centre, which causes the edges to tear, leading to web breaks. The result is substantial downtime as the paper is spliced or rethreaded through the press.

In a dry press hall, the rapid passage of paper through the press generates electrostatic charge, which becomes a particular problem as the printed work passes to finishing for cutting, trimming and folding, due to sticking paper.

Web printing is highly productive and any loss of production is costly, but problems relating to dry air can be addressed by maintaining the relative humidity at 50-55%RH. In flexo, with water-based inks, 55-60% is required.

Benefits of working with Condair on your print humidification project:

• Extensive expertise in all printing processes from projects around the world
• Comprehensive product range to precisely meet a printer's requirements
• Full service of expert advice, design, supply, installation, commissioning, maintenance and spares supply
• Ability to provide innovative, proven solutions
• Low energy systems to reduce operating costs and improve humidity control
• Low maintenance solutions that minimise on-going service requirements
• Increased productivity, decreased waste, improved product quality resulting in higher profits

Standard export packing is plastic bags with foam inside and carton or wooden case outside, then packed onto plastic pallet for container, If you have some specific requirements, just tell us, and we will do our best to satisfy you.

The delivery time is 25-30 days after the sample is confirmed.

AceFog is the recognized top manufacturer of industrial humidification system in China.

AceFog focus on research and development, manufacture, and sale of humidifying, air cooling, dedusting, dehumidifying and energy saving equipment. Our factory has three large workshops, covering 3,0000 squre meter area. We have more than 100 employees, equip with professional R&D team, reliable workers and efficient sales service team.

Our company is evolving as the change of customers’ needs, we are committed to developing and engineering new technology to best suit our customers’ demands. So far, we have got many patents on highly advanced and efficient humidifier designs.

Q: How long can I get my product after payment?

A: We would delivery within 5-15 days after clients' payment received.

Q: What is your after-sales services?
A: 1. We would supply the free maintenance within 12 months guarantee.
    2. We would supply the professional solutions during using.

Q: In the using processing, if i have some problem, how to solve it?

A: You can send me the email or call me, and send me the picture or video to me, I will let our engineer help you solve it.

Q: Are you a trading company or manufacturer?

A: As the largest manufacture of humidifier system, we are now taking the leading position of cooling industry in 

mainland China. 

Q: Can I visit your factory?

A: We warmly welcome you come to visit us at Zhengzhou city, Henan province. Contact us for more.

Q: Do you accept OEM?

A: Yes, we can accept OEM, and we have the professional R&D team to help you achieving your designs. 

Q: Do you accept ODM?

A: We welcome ODM, we have professional engineers team to help you with the design of the dehumidifiers and to provide you the professional suggestion with the dehumidifiers you want.

Q: Can I buy a sample for testing?

A: Yes, we can supply you with a sample. For most of the models, we have them in stock. We can supply you with the sample within 2 days after we get your payment.