Different Animal Swine Pig Feed Production Line

20GP and 40GP

Specifications

Different Animal Swine Pig Feed Production Line

1. Material receiving System
The material is feeded to the granular pre-cleaning machine, and then cleaned.

2. Crushing System-Hammer Mill
When the size of the raw material is big, such as corn, wheat etc. Then the raw materials must first be sent to hammer mill for crushing to reach a suitable size..
1) Adopt imported bearing and bearing box
2) With two temperature instruments to test working temperature of bearing

3) Tungsten Carbide knife on the hammers, can use on both sides.

3. Mixing System-Feed Mixer
1) with high mixing speed and short mixing period (30-120 seconds/batch).
2) High evenness mixing (CV ≤5%) without segregation;
3) Gentle mixing process and big adjustable range (0.4-1) of filling volume;
4) Entire-bottom type electro-dynamic or pneumatic big-door-open discharger, with fast discharging performance and at low material residue rate;
5) Equipped with return air pipe, no dust leakage and fully satisfies the environmental protection requirement;
6) The machine can be equipped with compressed-air cleaning system, which can reduce the residue to the lowest quantity.
7) Special atomizing spraying system can be customized for much evener addition of molasses and grease.

4. Pelletizing System-Pellet Mill
1) From Europe type cabinet, CPM.
2) The main drive adopts high-precision gear, which increases the output by 20 % than belt drive type.
3) Adopt imported high quality bearing and oil seal, which enables efficient, stable and low noise operation of the entire machine.
4) The feeder adopts frequency control electric motor, ensuring the outputting quality of pellet materials.
5) Multiple options of aperture circular moulds.The high quality circular moulds have long service life and enable to produce smooth and high quality pellet.
6) The internationally advanced compensation type snake-shape spring coupling has novel and compact structure and low-noise and low-failure function.

Parameter of feed pellet machine

5. Cooling System-Contraflow Cooler
1) The machine uses the newest design of octagon cooler tank. There is no blind angle for cooling.
2) The feeder uses the air-lock valve system, which has the advantage of large area of blowing and significant effect of cooling.
3) The discharger adopts the reciprocating slide valve structure, which is the stable and reliable in moving and less residual. 

6. Packing System-Packing Machine
After cooling, the pellets are packed into bags or stored as per your needs. The pellets can be weighed by the computer and then packed into bags.

Details of pig feed production line

Final animal produced by pig feed production line

Making different animal feed pellets, such as chicken feed, cattle feed, rabbit feed, fish feed, shrimp feed etc. 

FAQ about pig feed production line

1. What is the capacity of ring die pellet machine and pellet line?

We have different capacity of ring die feed pellet machine: 1t/h, 3.0t/h, 5.0t/h, 10t/h, 15t/h etc.. And the capacity of the production line can be ranged from 1t/h, 3.0t/h, 5.0t/h, 10t/h, 15t/h etc..  

2. What is the material of the ring die mould and roller?

We have two kinds of material: stainless steel and alloy steel. But it is better to use stainless steel material because of its long using life and can make good effect of feed pellets.

3. The oil lubricating system is automatic or semi-automatic?

Generally, the machine is with semi-automatic oil lubricating system. And it also can be with automatic type according to your request.

Please do not hesitate to contact BELLA WU, if you need any more information or have any other questions. We will be at your service at any time.