2.4GHz wireless Ultra-slim full-touch screen Water and oxidation proof video door phone with android

Specifications

2.4GHz wireless Ultra-slim full-touch screen Water and oxidation proof video door phone with android

Features

1. Ultra-slim design indoor monitor, full-touch screen, nice and luxurious, available for wall-mounted or placed on the desk.

2. Water and oxidation proof, durable alloy outdoor door station, supporting embedded and hanging installation.

3. High sensitive touch technology (with voice hint).

4. No radiation, low consumption, high resolution, 8/9 inch digital color screen.

5. Monitor, intercom, unlock, hand-free, multi melody, indoor call, 4CH video in.

6. Volume, brightness and contrast adjustable.

7. With adaptor and cable, easy to install.

8. Max: 1camera+6 monitors; 2 cameras+6 monitors.

9. Support SD card record, record time is 10s; max: 32G SD card, product equipped with 2G card.

10. 4CH video in, 1CH video out.

11. 4CH can be shifted by manual or automatically. Can connect with your laptop by the video capturer.

Specification

Operation Instruction

Connect cable, E-lock and power supply as this menu, then press monitor button and switch on outdoor monitor screen, enter function menu to adjust the brightness/contrast for best effect.

Video door phone specified instruction is as following:

Visitors Calls
The visitor presses the CALL button on the outdoor door station, the internal monitor will ring and the visitor will be seen, the host can talk to the visitor by pressing the TALK button once and the talking can last 120s.

The host presses the UNLOCK button to open the door, then press MONITOR/TALK button to end current conversation and enter standby mode.

Viewing the outside (60 seconds duration)
Pressing MOINTOR from the installed monitor will switch on the outdoor door station 1 and view of the outside will be seen on the screen, keep pressing the MONITOR for 1s, then shift for outdoor station 2, pressing MONITOR again will cancel the outdoor monitoring.

Choosing melody
Press melody button under monitor state to select prefer melody.

Monitors intercom
Under the standby state, press the indoor intercom button of one indoor monitor firstly, the other monitor will ring, and then press the talk button on the other monitor to start an internal conversation.
Press talk button again to cancel the internal intercom conversation.

Monitor
Press the monitor button to begin the monitor; press the SHIFT to change the Channel from C1 to C4. Keep pressing SHIFT for 1s and the 4channels will shift automatically every 5s, you can press the SHIFT again to cancel the autumnally state. Press MONITOR button to cancel the monitor state.
Note: in the monitor state, the outdoor camera can call the monitor also, and after the talking it will back to the monitor state again.
The video out can connect with the video capture card/DVR for recording or photo.