good quality wood peeler machine/wood peeler with low price

wood peeler features:

1.time saving
2.lower labour
3.large capacity
4.small consumption

1,The style of groove hopper can feed from one end, and the other brought the assembly line-based operation is expected to overcome power feed, material, sub-working approach disadvantage of the existing drum roller peeling machines need, thereby greatly enhancing the work efficiency.

2, as the teeth on the timber above the impact, not only timber in the machine bed to dosegment cycle exercise, and rotating around its own, so peeling efficiency, on the cold wood, dry wood and hard skinned species also have a better peel net rate.

3, the adaptability of the timber can be of different tree species, diameter, length and shape of the timber section of peeling, as the timber to do rotary segment sports and irregular beating, the concave curved section of the timber can be good contact with ladder-type teeth, so it avoid the ring of length, diameter, curvature as well as raw materials, such as more stringent requirements, therefore, on the bending of the peeling logs net rate is much higher. than other types of models principle

4, due to the huge chassis are fixed, so consuming small, failure rate is low and small repair work, vibration and noise ratio is much lower confidential skinned drum, machine can fall production, even without the base installation, easy to use.

5, more convenient access to the supporting material conveyor system, reducing the operator's labor intensity, so it can greatly improve production efficiency.

1.Single roller wood peeler  :

 Model: LK600I

 No. of Roller : One

Roller pipe thickness:7.8mm

 Capacity :6-7 ton/ hour

Body steel board:3mm with pattern  

Length of roller (mm) :6000 mm

Power (kw) : 11kw

Min. Diameter of wood : 20 mm

Max. Diameter of wood : 500 mm

Machine size : 6.2m x 1.8 m x 1.7 m

Weight of the machine :2650kg

2.Two Roller wood peeler   (diesel type)

 Model:LK600II

No. of Roller : Two

Roller pipe length:6000mm

Roller pipe: seamless steel roller pipe with center not offset

Roller pipe thickness:9.3mm

Capacity :9-10ton/ hour

Body steel board:6mm

Power: diesel engine 15hp+15hp(30hp)

Min. Diameter of wood : 20 mm

Max. Diameter of wood : 500 mm

Best log length:1500—2500mm

Machine size : 7.2m x 1.8 m x 1.7 m

Weight of the machine :3750kg

Bearing Model:P310

With pare connect with truck

Wheel model:800-15

Two Roller wood peeler   (motor type)

 Model:LK600II

No. of Roller : Two

Roller pipe thickness:7.8mm

Capacity :7-8 ton/ hour

Body steel board:3mm with pattern  

Length of roller (mm) :6000 mm

Power (kw) : 5.5kw+5.5kw( total:11kw)

Min. Diameter of wood : 20 mm

Max. Diameter of wood : 500 mm

Machine size : 6.8m x 1.4 m x 1.7 m

Weight of the machine :2850kg

Bearing Model:P310 with 60mm shaft 

3.Three Roller wood peeler   

Model:LK600III

No. of Roller : Three

 Roller pipe thickness:9.3mm

Capacity :10-12 ton/ hour

Body steel board:6mm

Length of roller (mm) :4000mm

 Power (kw) : 11kw

 Min. Diameter of wood : 20 mm

 Max. Diameter of wood : 500 mm

 Machine size : 4.5m x 2.10 m x 1.7 m  

With conveyor to different sides of the machine

pictures of wood peeler   :

if you are interested in this machine,please contact  Miss Lemon   

mobile phone:008613140123617