Good quality PE PP plastic granulating line

Specifications

    Good quality PE PP Good quality PE PP plastic granulating line

         This machine is used to pilleting the leftover material of PP,PE,PS,PC,PVC,etc. The whole line can be divided into four parts: extruding system, 

water ring granulating,dewatering and air delivery system.The whole line can be controlled automatically ,the parameters can be set on the touch screen.

Feeding Machine

This machine can be used with all kinds of extruders. It can carry plastic are cleaned into the hopper of Extrude. automatic.It can save your labour,ande realize the effect of safety and reliability.

Extruder

This machine is used to extrude plastic cleaned by high temperature.The extrusion line can be consisted by such accessory machine: main motor, the gear box, the distribution box, the barrel and screw, the dies, vacuum calibration tank. The distribution box enlarges the strength of the power and realizes uniformity.Double screws can make low viscosity index consume of raw material and improve production.It also has a Cooling tank making the heat of screw be appropriate.

Mould

The machine use plug board  to change nets and keep machine working.The mould is made by 40Cr nitridation .The pressure sensor prompts to change the nets.There are   a hydraulic equipment to change the nets quickly.

Water Channel

The water channel is material cooling 

Winds drying machine

Through the double channels strong wind dryer,force drying and cooling article material reach the fast speed effect of shaping up.

Pelletizer machine

It adopts grain design to cut the material ,which made the cutting much safe and accuracy .

                               The extruder play a big important part in the whole line, some parameters of the single screw extruder are displayed as below:

If you want any information about our production ,please contact  with us!

       We are looking forward to cooperate with you!