SUPPOSITORIES SOLUTION FOR PHARMACEUTICALS,COMESTICS

1. Finalize the design process

Rolls of packaging film (PVC ,PVC / PE,,dual aluminum composite film) was formed after the device into the perfusion system of the shell process has Stir the liquid through the high-precision metering pumps automatic suppository filling into the shell in and particles together into a suppository according to the length of pre-cut into segments and automatically sent to the cooling device cooling, the cooling device through the liquid solidified within a certain period of time, into a section of the suppositories after the particles through the cooling device (also is solidified liquid) into the sealing phase, while plastic, batch number, and finally to further tailor the shape.

2. Filling system

Filling the first six head filling, forming a suppositories for embedded filling, filling accuracy plus or minus 2%, materials have heat preservation system of electric heating barrels, stir to make the motor with top drug in uniform state, material of the circulating pump barrel drugs into the filling head, a filling surplus drugs through the other end circulation to raw material barrels to do next time filling..

3. Cooling part

The whole irrigation and drainage of the pack of drugs to cooling rack, cooling box external equipped with cold water chiller, cooling air through the cooling box four of the condenser cooling rack to the suppositories for cooling.

4. Seals the tail and play yards parts

After cooling of the solid suppository into the sealing area: preheat mould- > sealing moulds- > play yards mold. And then for the finished products to shear one group of six grain or five goals (according to the customer demand set).

5.Equipment advantage:

1) PLC testing function: through on-line monitoring function of PLC operation breakdown self check alarm and show the cause of the problem in synchronization easy operation personnel to remove the faults

2) Filling with static system in part

Note: shaping shell to filling parts if do not contain the device before due to trace pharmaceuticals filled in close to bolt shells in the area will flowing under the action of electrostatic force along the empty shell to climb a fraction of a high wall could reach the bolts sealing parts, so will influence the quality sealing behind.

3) Mixing barrel speed regulation system

Note: due to the different drug matrix series of different fixed mixing effect may be unable to make drugs before filling in the mix of finished product to affect bolt drug content.

4) The cooling speed regulating system

Note: due to the different different drug ingredients may need different cooling speed; The cooling speed too slow and low will cause the whole machine production efficiency down; The cooling speed is high may lead to drug because suddenly drop in temperature and split so the cooling speed can be adjusted to.

5) Shear grain number can adjust adjustable systems

Note: according to customer demand for products such as 4/5/6/7 set grain number. The machine can produce PVC/PEproduction.