Vagina Cleaning Sun Damage Recovery High Quality 8.0 Inch Skin Resurfacing Classical Medical Co2 Fractional Laser Machine

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

High quality classical medical co2 fractional laser machine

Fractional laser is the newest and hottest laser technique in the last two years and also attracts the most attention of hairdressing technology all over the world. it is a micro-invasive treatment between invasive and noninvasive. Fractional laser was called fractional Photothermolysis with English theory, which was first expressed by Dr. Rox Anderson, a laser medicalspecialist of Harvard University, in 2004. Immediately, that was agreed by specialist all over the world and applied to the clinical treatment reapidly.

Fractional Photothermolysis is a stretch theory of traditional Selective Photothermolysis. Not only the rapid and remarkable effect with invasive therapy, but also the advantage of less side effects and short recovery time with noninvasive.

Applications of medical co2 fractional laser machine

• Skin renewing and resurfacing;
• Skin tightening;
• Acne and acne scar removal;
• Smooth burnt scars and surgery scars, dermabrasion etc-;
• Remove intractable chloasmas and pigmentation;
• Sun damage recovery

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

Action principle

Fractional laser treatment is using laser drilling tiny holes on skin evenly, which cause a series of skin biochemical reactions. Achieving refirming, tender skin and remove stain. As fractional laser treatment can only cover partial skin tissue and the new drilled holes won't overlap with each other, part of normal skin gets reserved to speed up recover. The patient will return to normal life in four or five days. The therapy itself is safe and can cure any part of the body. The indication include acne scars, stain, surgery scars, traumatic scars, scalded scars, chloasma, civatte poikiloderma, wrinkle, flabby, light aging and etc. These clinical application are used in domestic and international with confirmed efficacy.

Main features

1. with 8.4 inches large-colored touch screen. Comprehensive Operator Interfaces greatly simplify the time of learning so as to bring our client economic benefit more effectively.

2. Maximum output power of 30W, ensuring the clinical demand of maximum output power, thus safeguarding validity of a single monopulse peeling various skin organizations and best effect.

3. The unique fractional output. Application of galvanometer scanning mode actively provide as much as seven speckle patterns that guarantee each part gets evenly in the facial.

4. The unique choice of focal spot density. Doctors can choice treatment area of exfoliative organization freely, which could easily hold the patient of appeal, tolerance and postoperative complications.

5. The unique Atlantic technology. CO2 fractional laser can change to CO2 Ultra Pulse laser by switching interface easily.

6. Equipped with various treatment tools. To satisfy different parts of the organization in different treatment needs.

Parameters of medical co2 fractional laser machine

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.

More Pictures of medical co2 fractional laser machine

The Package - Air box

1.Your inquiry related to our products or prices will be replied in 24 hrs.
2.Well-trained and experienced staffs to answer all your inquires in fluent English
3.OEM&ODM, any your customized products we can help you to design.
4.Distributorship are offered for your unique design and some our current models
5.Protection of your sales area, ideas of design and all your private information.

Warranty:We have 1 years Warranty,lifetime maintenance.Within warranty, we offer free repairingservice and provide replacement parts for free.

  medical co2 fractional laser machine

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

1. How do I know if I need CO2 laser? 

Anyone who has sun damaged, aging skin, irregularly pigmented skin, wrinkles, sagging, irregular texture of the skin or other skin condition that could be expected to be improved with this treatment that understands the risks, costs and time necessary to achieve the full benefit of the procedure and who has realistic expectations of the ultimate outcome.

2. What benefits can I expect? 

Results that are expected are a very significant and noticeable reduction in the components of sun damaged skin such as “age-spots” (also called sun freckles, liver spots, and lentigines), fine lines, wrinkles, scarring, uneven coloration, skin laxity, textural irregularities, dull tone, and a thinned collagen layer. The skin will continue to improve for a period of 6 months following the procedure provided proper skincare is used and sun exposure is minimized. Sometimes the results are not significant until the 6th and even the 9th month, depending on the person's age, their aftercare routine and their history of smoking

3. Is there another way to get the same effect? 

Typically, there are no other treatments that can give you as much of an overall effect with only one treatment. You would have to combine the above with fillers or tissue tightening devices to achieve similar effects.