0.1-2.6mm Hot Selling !!! Skin Resurfacing Pixel 15W(20W) Co2 Fractional Laser Equipment Portable Co2 Fractional Laser

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

portable co2 fractional laser

How does it Works?

Fractional skin resurfacing with nubway uses laser energy microbeams to create areas of affected tissue that extend through the epidermis into the dermis. These areas can be either "non-ablative" (the laser beams coagulate the affected tissue) or "ablative" (the laser beams vaporize the affected tissue).

Non-ablative procedures are minimal to no downtime procedures, while ablative procedures provide a single treatment option.  The body's natural healing process creates new, healthy tissue to replace the areas of affected tissue, resulting in healthier, younger-looking skin.

Feature of  portable co2 fractional laser
1.The rf laser output better laser mode,smaller laser focal spot,and higher density of the power . It also has higher ability to penetrating tissue and less injured for the histiocyte. With little healing time the customer would enjoy more comfortable treatment.
2.The RF tube could scan stable spot size. When do the treatment the laser would put out
uniform power with steady spot size,distance and depth so it coud improve the effect.
3.The RF Franctional laseradopt to Ceramic resonator. It has better Sealing than the glass tube laser. The life of the RF tube is twice as the usual glass tube.
4.With good stability the powersource works very well. The rf laser seprate with the powersource which could ensure longer workinglife and stability. Also it could lessen faultrate and it's convenient to repair.
5. The frequency of RF Tube is 5000hz-2000hz which is more suitable to subtle
surgical treatment

Application:

Smooth out wrinkles and fine lines
Flatten worry and frown lines
Clear up sun-damaged skin
Decrease appearance of acne scars
Shrinking the appearance of pores
Flatten traumatic scars
May lessen bags and circles under eyes
Decrease jowls and improve angle of the jaw
Remove age

           

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.