2015 Epicare Hair Removal Diode Laser Whole Body 808nm Diode Laser Hair Removal Machine Abdomen

wooden box,aluminum box,paper box

Treatment principle of 808nm diode laser hair remover:

Using thermal damage theory, the abundant melanin absorbs laser energy and the temperature rises rapidly, under this situation the hair follicle and hair shaft are damaged by thermal.

 At the same time, the oxygen supplying tissue surrounding the hair follicle’s stem cells is destroyed by the spreading heat energy.Thus hair regrowth is stopped permanently.

Treatment scope of permanent hair remover:

 All kinds of hair on body! Such as hair on face, around lip area, beard, underarm, legs,breast, bikini area Etc.

    Factory price! --Professional 808nm laser hair removal beauty machine& equipment   

1. Features                                                                                                                       

1.Treatment handle using sapphire optical crystal as light guide, never worn, life-long use without replacement.

2.Semiconductor refrigeration, air cooling, closed loop force strong temperature water cooling system, make sure long time continuous work. The water flow sensor and water temperature sensor, effect cooling system, greatly increase the life of the machine and the safety facto

3.Treatment time is short, quick recovery, do not effect patient's normal work

4.Skin test function: Using adjustable high-powered video camera , can see clear treatment effect before and after treatment, and stored by the file management system.

2. Application                                                                                                                   

Permanent Hair removal of all body part : beard, lips,arm ,leg ,armpit hair,bikini line and so on

Improve pigment ,dark color of the mole ,burgundy birthmarks and other symptoms

System working conditions

1.Temperature of environment :5~40℃

2.Relative Humidity:≤80%

3.Power supply:Single-phase AVC 220V,110V ±10% 10A 50/60Hz

Along with the machine main body , there is one input power plug, as the standard single-phase three-pin plugs (international standard plug for power network connection)

3. Installation                                                                                                                   

Open the package, and check all the accessories first as the Accessories List , to make sure all the accessories are in good condition

Water to the apparatus :

1:One time you need to enter 8L cooling water, the water must be distilled water, so that keep the laser generator not burn and long life. Damage caused by the not distilled water, our company can not warranty.

2:For the first time , when the water enough to " high water level", stop inject water, turn on the machine working 3 to 5 minutes to let the water cycle in the machine, emptying the gas in water cycle pipe. Then turn off the machine and inject water again till to the " high water level"

Installation and disassembly of diode laser treatment handle:

Effective:

steady energy is achived by
a. Japan made Capacitors which stabilizes.

b. US made laser rod ensures 100,000,000shots.(every shot, steady energy)  but during our testing it went to 10 million shots.

c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.)

d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment.  

e. High speed DC pump made in germany, which keeps TEC chilled water flowing. 

f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.

Note

1,You must turn off the machine when you do the above installation and disassembly of the handle

2, After change the handle,while inject cool water, you need to pay attention to the handle connectors, if there are water leak, please drain all water first, disassembly handle, and keep connectors on handle and machine dry,and install again and then inject distilled water again.

3,If do not use this machine for long time or need to transport, please make sure drain all the water.

4,Change water: every month you need to change the used distilled water with new distilled water

5,Before put the handle back to the holder, you must make sure the handle switch button is on "OFF" station , there are no light produced by the laser generator . (For fear of damage the holder and machine inner electric boards )

System parameters                                                                                                        

1. Treatment room must have a stable and reliable power supply system with ground protection
2. Adapted voltage range : 200V - 240V or 100V-120V

If your local voltage beyond this range , we recommend you add a regulator, and the regulator's power should be greater than 3 KVA.

808 diode laser hair removal machine Theory  :

The System use special laser with long PulseWidth 808nm, can penetrate to hair follicle. 

Using Selective light absorption theory, laser can be preferentially absorbed by the melanin of the 

hair And then heating the hair shaft and hair follicle, moreover to destroy the hair follicle and oxygen

 Organization around hair follicle. When laser outputs, system with special cooling technology, cool the skin and protect skin from being hurt and reach a very safe and comfortable treatment! 

Every time finish treatment, you need to clean the treatment handle, especially the crystal light guide . You can use gauze or a cotton swab dipped in 75% alcohol wipe the crystal 3 to 5 times .

Please feel free to contact us

Treatment characteristics

1.Terminator 808 + combines the benefits of all 3 wavelengths, It is groundbreaking for the laser hair removal industry.

2. combined wavelengths covering the optimal treatment spectrum 808nm 755nm 1064nm,  the treatment Characteristics for different hair

3.Virtually painless

4.All skin types, even tanned skin