Laser Skin Resurfacing Equipment MNF200

Specifications

Laser Skin Resurfacing Equipment MNF200

1.Pinciple of  Laser Skin Resurfacing Equipment MNF200

 MNF is designed specially for delivering RF energy directly to epidermis
or dermis layer in order to stimulate and re-model collagen effectively
by either RF micro needling mode (invasive) or RF matrix mode
(non-invasive). It can be used for both epidermal applications and
dermal applications in one platform without changing any operational
environment.

Microneedle fractional rf system is based on synergy effect of a precisely 

controlled Bi-polar RF plus minimally invasive micro-needles for non-surgical face lifting.wrinkle reduction.

Such an ideal combination reduces treatment time and down time significantly comparing with 

fractional laser besed  treatment. Also,it can be treated for all skin type,even darker skin with low risk of 

skin burns and PIH.

2.Structure and Accessories of  Laser Skin Resurfacing Equipment MNF200

3.Advantage of  Laser Skin Resurfacing Equipment MNF200

(1) No insulation Plating It is possible to operate equal therapy to Epidermis Layer and Dermis Layer as the needle do not have insulation Plating
(2) Needle depth control (0.25-3.0mm, 0.1mm step) Operates Epidermis Layer and Dermis Layer by
controlling the needledepth in unit 0.1mm
(3) Stepping Motor Type Different to existing Solenoid Type, the needleinserts to the skin smooth with no
shock andcauses lesser bleeding and pain after the operation
(4) Safety Needle System
-Sterilized disposable needle tip Operator can easily notice the applying RF energy from a red light
(5) Gold Plating
Needle is durable and also has high Biocompatibility by applying Gold Plating. Patient with metal allergy
could also use it with not concerning Contact dermatitis

(6) Cold&Heat Handle
Cool therapy use before MRF or SRF, can make the skin at a low temperature paralysis state, use afterMRF or SRF, it will soothing the skinand reduce swelling.The heat therapy can be used before MRF & SRF forfacial lymphatic drainage

(7) A variety of SFR treatment head is optional

(8) LED orientation: through the led orientation, the treatment area can be more accurate treated

4.Treatment Scope

Face treatment

(1) No-surgical Face Lifting            

(2) Wrinkle Reduction         

(3) Skin Tightening

(4) Skin rejuvenation(Whitening)      

(5) Pore Reduction               

(6) Acne Scars

 Body Treatment

(1) Scars                                         

(2) Stretch Marks                 

(3) Keratosis pilaris

5.Treatment Effect

6.Technical Parameter

7.Certificate

8.Production Proccess

9.Package Detail

10.FAQ

(1) How does the procedure work?

The ThermaCool system works with a highly developed treatment unit called ThermaTip that emits a 

controlled amount of high-frequency energy. With each contact with the skin, the ThermaTip uniformly 

heats up a large amount of collagen in the deeper layers of the skin and the subjacent tissue, 

while at the same time protecting the outer layer of the skin by cooling it. 

This deep heating leads to an immediate firming of structures deep in your skin. With time, new

 and regenerated collagen will be produced, bringing about further firming and smoothing of the skin.

(2)How does the treatment feel?

With each contact with the ThermaTip treatment tip you will feel a short, deep sensation of heat that is 

created by the supply of high-frequency energy into the skin and tissue. This feeling of heat is a sign 

that your collagen has reached a temperature that is ideal for firming. For the protection of your skin, 

the treatment tip is cooled before, during and after heating. This makes the treatment more pleasant. 

Depending on your sensitivity to pain, you may be given a light sedative or analgesic – anaesthesia is not necessary.

(3) How long does the procedure take?

The treatment may take between 30 minutes and a little over an hour, depending on the size of the area to 

be treated. Some further time may be required to prepare the skin before the treatment.

(4)How does my skin feel after the treatment?

Your skin should feel firmer, smoother and more youthful immediately after the treatment. 

With time you will notice further firming.

(5) How many treatments do I need?

For the majority of patients even a single treatment produces the desired results. Your physician can 

determine the duration of therapy that is especially suited for you.

(6) When can I see results?

Studies carried out by micro needle fractional RF and published recently

show that there are visible changes immediately after the treatment as well 

as measurable improvements of the firming effect gradually over 2 to 6 months 

after a single treatment. However, many patients report that they have noticed reactions even earlier.

(7) How long does the effect of the Thermalift procedure last?

According to unpublished reports by experienced doctors, the results last at least 24 months or even longer,

depending on the natural ageing process of the patient and the intensity of external influences that have 

an effect on the skin after the treatment.

(8) Is the procedure safe?

Existing studies and research data have confirmed that the micro needle fractional RF procedure is currently one of the most effective and safest non-surgical methods

of treatment for face wrinkles and skin creases. More than 300,000 treatments have 

resulted in a level of safety of 99.8%. Please speak to your doctor about the proof 

of safety of this procedure.

     Thanks for your time and patience! You are welcomed to inquiry our factory's Permanent Hair Removal Machine ,We can offer the best and professional service to you,looking forward the close cooperation with you!