Hot sale Double Handpiece Cooling Operation Fat Freeze Weight Loss Slimming equipment

OPERATION PROCESS:

Before operation:
1.Each part needs 30 - 60 minutes (depending on the fat thickness and health ).
2.Only a portion of a part of the operation of fat, for eample, to eliminate the fat in the waist, you need to complete a few courses.
3. After a course of operation , and another one of the cooling process in the same position for 2 to 3 months, can reduce the redundant fat layer thickness, after two times of operation , can enhance the frozen fat dissolving operation, but is not recommended for multiple randomized operations.
4.Frozen fat dissolving operation is mainly directed against the local hypertrophy fat accumulation zone to design, the physical health of people, but not for the overall obesity, mainly used for the operation of a particular part, such as the fat in the waist, abdomen and back, and other local fat. Its operation is not omnipotent, not the operation of obesity, it cannot replace it or other invasive operation . Substantial weight reduction should by eating a balanced diet and regular eercise, frozen fat dissolving operation can only carry etra fat elimination.
operation process in the application of qualified antifreeze, when the temperature is lowered to 0 to - 40 degrees to avoid frostbite. [ consumables, buy their own ]

In operation:
1.operation, testing to see whether it is normal heart rate [50-100 ].
2.Check the thickness of fat.
3. Clean the operation area, area of hair removal operation.
4.Marking the operation zone size.
5.In the operation of areas with antifreeze.
6.At the operation site paste antifreeze membrane.
7.Patients undergoing operation , should sit so that the upper torso and thigh was 90 degrees.
8.The cooling device to gently suck into the operation site, and setting the vacuum suction strength.
9.Regulate the suction strength to the appropriate time, maintain a constant suction, suction can according to customer 's ability to accept appropriate adjustment. At the same time to meet the suction massage mode.
10.operation of 25 - 30 minutes, press the stop control keys, stop suction., screening and adding antifreeze.
11.Repeat steps 10 to 11, until the completion of course [again ] power off by pressing the start button.

After operation:
After operation of the skin may appear slight injury, frostbite, pigment, careful nursing.

TECHNICAL PARAMETERS:

The host display: 8" TFT color touch screen
Power: 500W
Vacuum: 650mmHg
Pump flow: 60L / min
Vacuum : 0 - 5Kpa
Refrigeration temperature: -5 To 5
Working voltage: AC220, 230V 50Hz, AC110 - 120V 60Hz;