Ultra Pulse Fractional Co2 Laser Treatment Of Gynecology Vaginal 100um-2000um Rejuvenation/ Fractional Co2 Laser Ablation Equipment For Vaginal Tight

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Product Description

Sanhe Fractional Laser Co2 skin tightening system

How does it works?

Fractional resurfacing a new laser treatment modality that creates numberous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal for rapid repair of laser-induced thermal injury.

This unique modality, if implemented with proper laser delivery systems, enables high energy treatments while minimizing risks.

Detailed Images

Cutting head

Scanning head

Vaginal head

The different treatment shape

 Theory - co2 fractional laser

    CO2 Fractional laser is the most advanced conceptual fractional CO2 skin peeling laser system with a wavelength of 10600nm. In addition to its fine skin-peeling effect, it can effectively penetrate the laser beam into the dermis . It is the most beneficial skin recovery system and can achieve the long-term effect of collagen remodeling as well as improvement of aged skin conditions due to exposure to light. It can be very safely applied to various types of scars compared to the existing 100% total layer skin peeling lasers (CO2 or Er: YAG). In addition, it does not require a long period of recovery or side effects. It can remodel various types of deformed scars and skin tissue very effectively.

Ellipse,Rectangular, Triangular, Line, Square, hexagon, round...

Vaginal Treatment procedure

1. Use the digital endoscope to detect the condition of privates.

2. Under the WIZ Scan mode, insert the WIZ handpiece, Laser irradiation with 360-degree revolution, irradiating the laser  Pulling out the handpiece by checking the scales on guide tip.

3. Under the RF Scan Mode, put the Laser Irradiation on Target area, Rejuvenation and whitening.

Treatment Procedure

Laser source: Mtal RF Co2 Laser Generator
Laser Type		10.6 μm
Out put Power		30W
Focal length of working head		F=50mm 75mm 100mm
Indication Beam		Red Diode Laser ( 650nm, ≤5mw )
Transmission System		7-Articulation Joint Spring Arm
Smoke Exhausting System		Built-in air blow
Cooling System		Air cooling
Environmental temperature		5°C~40°C
Relative Humidity		≤80%
Power Supply		~220V±22V,50Hz±1Hz
Dimension		52*68*132cm
Weigh		35kg

Technology of Ultrapulse
Mainly let the original average output of the laser energy concentrated in a very short period of time then output, due to the high pulse power, short time, and more round spot, the pressure on the surface from laser heat transfer effects is low (small heat-affected zone).

Operation Procedure

1. Clean the skin

2. About 20-30 minutes prior to treatment, apply a topical anesthetic to the treatment area. 

3. Right before treatment beginning, wash off the anesthetic and apply a thin layer of the tracking gel. 

4. During treatment, apply cold air for patient comfort.

5. After treatment, use our semi-conductor laser (physiotherapy laser) to enhance the patient’s treatment experience and accelerate the benefits of treatment.

Packaging & Delivery

Our Service

1. Provide 2 year warranty

2. In two year, any problem, we will send spare parts to you by DHL.

Provide video and file for your reference

3. Our Alibaba account online for 24 hours. Our phone is open for 24 hours.

Our Company

Our big Family

Any questions please contact: 

Alice Su :-)

Tel/ Whatsapp: 0086 15811248211

Skype: alice.sanhe

Email: alice[at]

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.