Permanent Tattoo Removal Single Pulse Energy 1000mj EO Facial Veins Treatment Nd Yag Laser Q Switch

Professional Q-switched Nd: YAG Laser System

Base on Our professional technical background and longtime experience with laser, This fantastic system bring the powerful, reliable and versatile platform for your laser aesthetic application.

With MES-550For most of skin treatment applications, such as tattoo removal, pigmented lesion removal, vascular lesion treatment, nevus removal...MES-550 would be your best choice

The cost effective MES-550 Q-switched laser, become a valuable tool for the surgeon’s over the world. With perfect technical support and service network,we will provide convenient and fast on time service for you.

Powerful platform by T-pulse laser technology  

T-pulse™ adopts the active EO Q-switched module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-10ns pulse-width which produced the mega-watts level high peak power!

The key components imported from Germany, MES-550 produced the high quality flat-top beam.It’s real uniform beam profile which would be better for the pigmented lesion broken and limit side-effect on normal skin.Especilly for the chloasma treatment, it need the lower energy with uniform beam profile to get the best result.

With our special housing and hardware platform, MES-550 would be used in different application environment.It’s very useful for some high humidity and high temperature range and adverse circumstances.

Q-switched Mode for Pigment Lesion Removal

According the selective photothermolysis theory, the laser with different wavelength could effect to different color pigment lesion. It would be safe for the normal tissue of skin.

With high peak power, the focused energy would concentrate on the pigment granules, then it would be boiled away or broken and bring out of body by lymphatic system.

EO Q-switch is an electrical signal controlled Q-switch. With this electro-optic device, the repetition rate could totally be controlled and energy can be adjust continuouslly. Moreover, the output energy stability is better than passive Q-switch laser.

MES-550 Q-switch mode could produce high peak power pulse laser with “ns” level narrow pulsewidth. It’s helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulses which will lead to longer effect time on skin.

Peel Mode for Skin Rejuvenation
Soft laser peel is a new skin rejuvenation technology which could take effect with a special carbon lotion or carbon powder normally. The longer pulsewidth laser of MES-550 could scan the skin and make the skin softer and younger.

With the special handpiece for peeling, MES-550 laser peel could provide the additional function than any other types of Q-switched lasers in the market.You could also treat the skin with Q-switched mode and peel mode alternatively.

Intelligent ICMS cooling manage system

ICMS™ 

All the alerts of cooling system are monitored by MCU control system,once any function work unproperly, the MCU would protect the system with corresponding procedures.Thus, you can work with MES-550 for longtime without any worries and break.

Durable and easy to use

1.7 jointed arm delivery system, make it easy for longtime treatment
2.Two handpieces choice base on different treatment mode
3.Red diode laser beam point, find the right treatment area exactly
4.Motor drived auto-switching with 1064/ 532nm wavelength change
5.Operation and parameter adjustment with color TFT touch screen

Typical Application
1.Removal of eyebrow line, eye line, lip line...
2.Removal of colorful tattoo:red, blue, black, brown...
3.Clearance speckle, freckle, coffee spots, sun-burn spots, age spots...
4.Removal of vascular lesion and spider vessel
   Removal of birth mark, Ota nevus, Ito nevus,black nevus...
5.Skin rejuvenation with laser peeling

Technical Specifications

l Laser Type: EO Q-switched Nd:YAG Laser;

l Wavelength: 1064/532nm;

l Output Energy(max.

Working Principle:

Laser emitted by the system has a strong penetration ability which allows it to reach 

the deep layer of dermis. The pigment particles absorb the light energy and explode 

sharply, burst into the tiny pieces, thus diminish the color density and get rid of it.

So the appliance can effectively do away with mutant pigmentations and vascular tissue

based on undamaged ambient tissue. This is called ‘Selective heat absorption’ principle

in medical field.

l Energy density(max.): 12.0J/cm2@1064nm;

l Pulse Width: 8±2ns@Q-switched mode, 200-250μs@peel mode;

l Repetition Rate: 1,2,3,5,10Hz;

l Spot Size: φ1-7mm for Q-switched mode, φ8mm for peel mode;

l Beam Mode: Flat-top;

l Cooling System: Closed Cycle Water to Air Heat Exchanger;

l Delivery: 7 jointed articulated arm;

l Control System: 8.0"TFT color touch screen;

l Electrical Power: 220V,10A,50/60Hz;

l Dimensions: 1100(H)×330(W)×830(D);

l Weight: 90Kg.

Interface:

Photos:

Beijing Metos Technology Co., Ltd is a professional manufacturer medical & aesthetics devices in China. METOS TECH have a high qualified engineer team integrating with optics, machinery, electricity etc to keep us ahead on in this field.

Our main range of products includes IPL, SHR, Diode laser hair removal, Fractional CO2 laser, Q switched Nd Yag laser, Nail fungus laser, 2940nm Erbium Yag laser etc. With high technology, stable quality and perfect treatment results, these devices have won great popularity among clients from all over the world.

Based upon independent R&D, produce team and rich experience in strict quality control, we have provided ODM/OEM service for several international medical equipment suppliers.

We keep our promise for product quality and customer satisfaction, and willing to work for a bright future with our clients together!

Package:

Shipping:

Delivery term: 3-5 working days via express like DHL, UPS, TNT, Fedex, etc., air cargo shipping, or by sea.  

*Warranty: 

We offer 1 years free warranty, lifetime maintain, 24 hours calling service.

*OEM ODM:

(1).Software adjustment (logo &menu design, different languages)
(2).Unique machine shape design
(3).Treatment handle, filters design.
(4).Package (style, material, label design)
(5).According to the budget, machine weight, size, provides reasonable projects.

We also could provide the customized products as your requirements. Please feel free to contact with us.

Contact:

Vicky

Skype: tos