e one hair removal machine

Standard export aluminium with shockproof materials packing

e one hair removal machine

.

Treatment Principle of e one hair removal machine:

1.Basic Principle:

1.1 Photothermolysis effect: As the pigmentation contents of the pathological tissue are much higher than normal skin tissues, after absorbing of the IPL, the temperature of them are higher than normal skin, then the pathological pigmentation or vascular tissues are destroyed without hurting normal skin.

1.2 Biostimulation effect: IPL energy stimulates the collagen to reproduce and recombine , enhance getting the effect of lightening, rejuvenation, tightening pores and removing wrinkle.

2. Main Pricinple:

2.1 Pigment remvoal: As the pigment content of pathological pigment tissue is higher than normal skin tissues, it has a strong absorption of the IPL, then creates extreme heat instantly which causes these pathological tissues exploding and decomposing to tiny kernels, one part of these kernels will fall off with the metabolism of epidermis, and the other parts will be phagocytized by macrophage and expel out with human lymphatic system.

2.2 Vascular removal:Hemoglobin will selectively absorb the light of 585-600nm wavelength, by which when the heat of light raise the temperature to 60-65°C, the blood will coagulate and block the capillary vessels. Then the pathological capillary will be dead because of deficiency of oxygen, and finally metabolize the red blood streaks.

2.3 Hair removal: when IPL irradiates the skin, light with particular wavelength are selectively absorbed by melanin of hair follicles, by which the hair follicles are heated, when the temperature of follicles reaches high enough their structures will be damaged irreversibly, then finally achieving the effect of removing the unwanted hair.

Application of e one hair removal machine:

1.Pigment:Freckle, Chloasma, age pigment, sunburn, chorioplaque, all kinds of pigmentations.

2.Vascular lesions, red face, and red capillary.

3.Acnes:allergic acne, acne scar, blackhead, bottle nose.

4.Skin Rejuvenation:Face lifting up, smoothing wrinkles and pouches, whole body lightening and tightening.

5.Hair Removal:armpit hair, hairline, beard, whiskers, lip hair, body hair, bikini hair or any other unwanted hair.

Main Technical Parameter:

Transportation:

In case of transportation, please seal the locking buckles of the aluminium case with tape.

Attention: Make sure all the water has been drained out and all the water hole have been plugged before repacking the machine into the case.

Packing List:

Question&Anwer:

Q: The advantage of hair-removing ?

A: It’s fastest, the most efficient, safest, easiest for operation and the most economical.Using to do hair remove, combining the light energy and radio-frequency, which can be worked on the role and dry hair follicle, in spite of the hair color---------even white hair can effectively eliminate.

Q: What is E-Light?

A: It is the first and only technology that simultaneously harnesses the power of bi-polar radio frequencyand optical energy (either laser or light).It can tender skin, remove freckle, remove hair and wrinkle obviously and stably. An E-Light therapy equivalent of 5-10 times of traditional photon therapy. E-Light has three main points: IPL+epidermal cooling.

Q: What kinds of dermatitis can E-Light treat? How’s the effect?

A: E-Light has a wide range of light therapy, almost covers all of the former ones, including: lifting, rejuvenation, hair removal, remove rough skin, tender skin, sunburn,age pigment and freckles etc. Further more, E-Light has more effective treatment on flipperty - floppery skin, especially on the neck relaxed skin.

Q: E-Light applies to which kinds of people?

A: The people who want to get the following result: Improve the body shape or remove stubbornly cellulite, lift and firm skin. Especially for the ones after liposuction, to accelerate postoperative recovery, compact skin and improve skin condition.

Caution:

1. Before use, please check if the circuit is connected right.

2. Before use, please infuse the distilled or pure water into Infall until some water

overflow from water output. Be sure not use the tap water or table-water.

3. Before use, please fill the water tank, be sure not start the machine with water, if so and make the optical crystal head damage, the supplier will not burden it.

4. After the machine is started, please wait about 1 minute and then start operating, it is good for water cycle completely.

5. During operating, please apply cooling gel onto skin, and take the optical crystal head lightly along skin. Be sure not to let it away of skin during operating, to avoid burn skin.

6. Be sure not to use the optical crystal head to aim at eyes during operating.

7. Be sure not to take the optical crystal head to shoot on surface of the machine during operating, to avoid damaging it.

8. If not using the optical crystal head, please hook it. When taking it by hand, please pay more attention to it, avoid it falling down broken.

9. Be sure not to disassemble the machine if no the supplier’s agreement.

10. Timely change the cooling water every month, according to the water quality, the period can be prolonged or shortened. It can avoid power of output-light falling.

For the more, under the status of continuous work, if feel the optical crystal head

very hot, please change the inner water.

11. During operating, please be sure to connect the machine with the earth well.

12. During the course of transporting the machine, please connect the venthole and infall with a shourt pipe, and be sure to remove it if operating next time. If operate the machine not according to the manual, any burn and damage, the supplier will not burden it.

Multiple colors available:

..