2015 OSN Vacuum body contouring massage slimming equipment

2015 OSN Vacuum body contouring massage slimming equipment

Principle:

1.  vacuum rolling with RF( ):

Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time,vacuum and roller mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect.

  The  technology  that  vacuum  folds  skin  makes  RF  energy  penetrate  a  specific  folded  skin,  greatly  improve effect and safety, even for the upper eyelid area treatment

Ultrasonic cavitation slimming machine adopt the latest scientific and technology can be effective treatment for stubborn cellulite and orange peel fat. An ultrasonic cavitation generator is based on the resonance of pressure waves in continuous transmission. This produces microbubbles that implode adipose cells, destroying and processing of fat in a liquid substance, which will be eliminated by the lymphatic system, urinary and faecal route. This makes one believe that corporal remodeling, because it redistributes the body cells that have not been destroyed.

The high radio frequency electromagnetic wave produced by the machine radiates into the skin, then reaches the darma layer where the collagen fibre are located. The concentrated electromagnetic wave makes water molecules nearby move so fast to produce heat. The heat gets collagen fibre provoked, making them strained, line up and re-grown. In the months, the natural process will lay down new collagen which is thicker, more organized and has a structure similar to that found in youngers. In addition, one megahertz radio frequency can aslo heat up the cellulite cells,  increase the diffusion of oxygen and reinforce the essence exchange in and out of the cell. Thus accelerating the speed of body fat metabolism to achieve the purpose of cellulite removal.

Multipolar technology uses a combination of focused tripolar RF energy and tripolar muscle energy which are delivered into the skin in a unique simultaneous application.
The triple action of Tripolar technology consists of RF deep volumetric heating combined with internal muscle contraction and external mechanical force which together yield maximum fat removal and lymphatic drainage as well as skin tightening.

Technical Parameters: 

AC220V,  50HZ/AC110V,  60HZ

Working handles show:

One:Big size vacuum rf roller(5Mhz RF+ Infrared Light +Vacuum+rollers

Four models working way of the large mechanical rollers:
1. dual rollers rotate inwardly
2. dual rollers rotate outwardly
3. dual rollers rotate clockwise simultaneously
4. dual rollers rotate anticlockwise simultaneously

This device employs fourtreatment modalities:
-Infrared light heats the tissue up to 2mm depth. 
-Radio Frequency (RF) heats tissue from 5 to ~ 15mm depth. 
-Vacuum + massage mechanisms enable precise targeting of energy to the tissue.
-Mechanical massage provides lymphatic drainage (dermal and hypodermal ). 
-Biological Impact of Treatment -Increased -abolism leading to demarcated desired 
-ana-bolic and catabolic alterations at predeter-mined skin components and depths.

Two:medium size vacuum rf roller(5M RF+ Infrared Light +Vacuum+rollers) 

Two models working way of the small mechanical rollers:

1. dual rollers rotate clockwise simultaneously

2. dual rollers rotate anticlockwise simultaneously

Vacuum models:

1. Model A: long suction mode 

2. Model B: inhale 0.5 seconds and deflate 0.5 seconds 

If you use the discontinuous vacuum model, the patients will be more comfortable same like massage machines, So we also 

call it cellulite massage machine. But if you want more good results, long continuous vacuum scution will be a better choice. 

Push all the fats to the near lymph nodes to reduce it.

Three:Small vacuum RF(vacuum and 5M RF)

Four:40K cavitation

After ultrasonic cavitation treatment,85% fatness will be dissolved and removed through lymph system. Through the liver

15% fatness will be transformed to be carbohydrate, to supply the people’s daily necessary consumption.

Control interface:

OEM SERVICE:

We can add the multi-function as customer's request,such as change the color,print the LOGO,change the operating language,add other function on the machine.....etc.

More detail information,please contact us

1.1 years warranty with lifetime free service and maintenance

2.Free training for operation of the equipment in our company, which provided by our specialized training department.

3.On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.

4.OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment

5, professional after-sale service team, solve all the problem in time

Q: How can i become a distributor of Osano ?

A: Contact us immediately for further details by sending us an inquiry.

Q: What’s the delivery time?

A: You will get machine during 3-6 days after payment received

Q: What’s the payment method?

A: T/T(bank transfer) Western Union, Money Union, Escrow …

Q: How to do the maintenance when something goes wrong with the machine?

A: After you get the machine, there is the user manual, maintain manual, guide you to

operate the machine, 24 hours calling service.