La mejor calidad de criolipolisis maquina de frio criolipolisis maquina

La mejor calidad de criolipolisis maquina de frio criolipolisis maquina

Working handles

Cryolipolysis Technology
Three core technology: Frozen melt fat ,Cavitation break fat ,Radio frequency
1) As triglyceride in fats will be converted into solid in particular low temperatures, It uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat, When fat cells are exposed to precise cooling, they trigger a process of natural removal that gradually reduces the thickness of the fat layer. And The fat cells in the treated area are gently eliminated through the body's normal metabolism process, to eliminate unwanted fat.

2)Ultrasonic liposuction: Throught the strong ultrasonic, direct into the fatty layer, speedily vibrate deep-seated cellulite, produce
numberless vacuum air packets, mightily strike the fatty cells, let them produce inner cracking, and dissolve to be the free fatty acid.
3)Radio frequency is one kind of high frequency electromagnetic wave, it can penetrate the dermis and subcutaneous tissue through the
5 fat layer, take heat into deep skin and then accelerate regeneration and reconstruction of skin deep-tissue. Bipolar RF can produce energy by impedance from the skin, which can make the fatty layer temperature increase in very short time, and this heat will also act on collagen in the dermis layer. Collagen in the dermis layer will shrink immediately after the temperature rise and proliferation of new collagen, so as to achieve the effect of skin pulling, pigmentation improvement, skin whitening, and wrinkle removal.

Operation Steps:
1)Check all accessories whether they are connected right or not, clean or disinfect the accessories.
2) Clean the skin .
3) Mark the area where need to treat
4) Put on theAnti-freeze Mask on the treat area.
5)Put the Cryolipolysis handle on the treat area.
6)Plug in the power and switch on the general power on of the control panel.
7)According the client’s fat part status, adjust the Intensity and the Vacuum mode and Working time.
8)Turn on the Cryolipolysis system. Working on the body. At the same time, you can adjust the intensity of the system by the button on the handle piece.
9)After treatment, please pause the working, then switch off the power. Clean the spare parts and place them in original.

It is very suitable for spa,look at the effect of the picture

CE certificates

Important Safety Notice
I.Please don’t disassemble the equipment or try to do some other operation, which haven’t been indicated in our instruction. All the repairing work should be done by our admitted professional personnel
II. Please don’t assemble or operate this equipment while you are near the water or your hands are wet. Notice that don’t pour the

liquid on it.
III. Please pull out the plug from the socket when you met such conditions as below. And in touch with professional maintenance
Station.
A. The equipment touched liquid
B. The equipment has abnormal smell, smoking or loud and strong noise.
C. Cable is broken
D. The equipment is fallen down and broken
IV. Please don’t put anything on the cables, don’t place the equipment at any place where someone can step on the cable.
V.Please pull out the power cable after using it for your safety
VI. Don’t put anything into the equipment’s jack, otherwise it may
6cause fire or touch the electricity. If something enters the equipment, please don’t pick it out by yourself, contract distributor or our company immediately
VII.Please don’t put the equipment on the anything that can’t stand steadily, avoid it turns over and damage.
VIII.Our company has the right to modify the information in this introduction before notify! And keep the explanations right for