Osano LM-S500G bodybuilding equipment vaser shape cellulite remover machine for all skin types

2014 Osano LM-S500G  bodybuilding equipment  vaser shape cellulite remover machine  for all skin types  

 (vacuum roller &lipo laser&CAV&RF)  

OEM/ODM service

Dealer wanted all over the world!

You see,there are Ultrasonic cavitation & sixpolar radio frequency & Vacuum infrared rf roller massag &lipo laser

Perfect design and power function,you deserve it!

Real pictures of LM-S500G on work (5 treatment heads in total)

Specification of  LM-S500G

New diode laser pads,much more powerful 

From Raw material to the finished machine  diode laser 

Comfortabe and durable vacuum rf roller for cellulite

Medium size vacuum rf roller massage ,5 M radio frequency on the wheel , skin tighten at the same time.

The Science Behind The Lipolaser
The LipoLaser is a 100% Non-invasive, laser-based, spot fat reduction and body contouring system. Offering the relaxation of a 40-minute massage with the benefits of inch loss!
Rather than a painful incision, the LipoLaser uses laser energy to safely (and painlessly) penetrate the skin and target specific adipose (or fat) cells. It is through this targeted process that the LipoLaser is able to in fact stimulate the cell itself into releasing water, free fatty acids, and glycerol. Having released these three compounds, water, free fatty acids, and glycerol (often referred to as Triglycerides), the fat cells “shrink” significantly, resulting in inch loss for patients!

How does the LipoLaser Compare to Natural Weight Loss?
As mentioned, the science behind the LipoLaser lies in its ability to stimulate the release of triglycerides from the targeted fat cells. This process, the release of water, free fatty acids, and glycerol, from the adipose calls, is not only natural, it is essential for the human body to function.
The human body is an energy machine; it intakes fuel (caloric intake), it converts the fuel into an energy source and stores it (as triglycerides in fat cells), and then releases it when the need arises (fat cells release stored triglycerides). The challenge in this fantastic process is that sometimes the body stores more energy than it needs in its fat cells, resulting in an increase in an individual’s physical size. Thus, it is by targeting this excess energy storage, and by further stimulating the body to undergo its natural process of releasing it, the the LipoLaser achieves its impressive results. Learn more about the LipoLaser.

What is LipoLaser?
The LipoLaser was designed to specifically address spot fat reduction (or inch loss) and body contouring.
Administered in relaxing 30-40 minute sessions, the LipoLaser provides inch loss, but without the surgery, the pain, or the extensive recovery time. By directly targeting adipose cells (or fat cells) the LipoLaser offers a safe and effective spot fat reduction solution that can be applied to multiple problem areas including:
Waistline
Mid & Lower Abdomen
Upper, Mid, & Lower Back

Buttocks & Thigh Areas
Arms & Underarms
Chin
The LipoLaser is the ideal treatment for all body types. It works synergistically with the body’s natural weight loss mechanisms. It specifically targets troublesome areas to remove inches.

How does LipoLaser work?
The laser energy safely penetrates the skin targeting the fat cells (Subcutaneous layer). Once the cells are permeated, they release fatty acids, water and glycerol, or triglycerides. The triglycerides are released from the fat cells and the body uses them as an energy source. The fat cells then “shrink” significantly resulting in inch loss and the removal of cellulite.

Most patients will incorporate the use of a whole body vibration (WBV) platform for 10 minutes after treatment. WBV stimulates all cells in the body to function at a higher rate, which in turn increases the metabolism causing more fuel to burn which helps to accelerate weight loss.
WBV causes increased local circulation to targeted areas, in turn giving the visible cellulite area a “smoother” look.
WBV works from the inside out. Waste products are expelled at a cellular, lymphatic and excretion level.
WBV stimulates all cells in the body, increases blood flow and oxygen intake and stimulates metabolism to help flush out toxins.
LipoLaser is shown to release 40 to 60 grams of fat during a typical 30-40 minute waistline treatment.
This represents 400-500 calories.
Your whole body vibration session following the laser treatment will ensure the 400-500 calories of fat loss are not reabsorbed by the fat cells.

What To Expect During Treatment?

Many of my patients tell me that a VelaShape treatment feels like an athletic or “deep tissue” massage. You’ll feel some slight pulling on your skin as your clinician uses a pulsed vacuum device to ready your skin and maneuver it into the optimal position for treatment. Then you’ll feel a warming sensation as the heat from the RF and light energies work on the fat cells beneath the skin’s surface. At no time, however, should you feel uncomfortable.

VelaShape sessions can last from 20 to 60 minutes, depending on how large an area of your skin is being treated.

What To Expect Afterwards?
You’ll probably retain a sensation of warmth or heat for several hours after the procedure. You may also experience some redness, swelling, and (in rare cases) bruising, but these side effects will quickly subside. You can return to your normal activities right away.

Although you’ll notice some tightening and smoothing of your skin immediately, the shrinking of the fat cells takes time. You may need to wait several weeks to see a significant reduction in cellulite. For best results, I usually recommend four to six treatment sessions, with a week of recovery between sessions.

Maintaining the Results
Of course, all cellulite treatments offer only a temporary solution. You’ll need periodic Velashape treatments to preserve your results. You’ll also need to make sure you continue to follow healthful lifestyle habits. By exercising regularly and eating nutritiously you can keep unwanted fat-and the cellulite that accompanies it-off your body.

LM-S500G under CE testing 

Factory of OSANO in 2013 

shells , motor of the roller ,PCB board ,shells of vacuum roller head ,and cryo heads  cup ,tripolar rf ,besides we have a transportation molding machine

thus ensure our package is trong enough  to bear all the shipping .