Multifunctional New Arrival Most Advanced 808nm Diode Laser /diode Medical Laser Hair Removal Machine / Diode Laser 808 Face Underarm

1.Cost-effective;

2.Convenient for transportation;

3.1200W laser power, it is more effective and less treat seesions needed;

4.Micro channel for cooling system, it is more comfortabal and safe during treatment;

5.While the machine can also work 8 hours continuous;

6.6mm tip for localized area hair removal.

vertical diode laser machine real photo:

vertical diode laser handle real photo:

Colorful touch screen of 808 diode laser epilation beauty machine

Treatment principle of 808nm diode laser hair remover:

Using thermal damage theory, the abundant melanin absorbs laser energy and the temperature rises rapidly, under this situation the hair follicle and hair shaft are damaged by thermal.

 At the same time, the oxygen supplying tissue surrounding the hair follicle’s stem cells is destroyed by the spreading heat energy.Thus hair regrowth is stopped permanently.

Treatment scope of permanent hair remover:

 All kinds of hair on body! Such as hair on face, around lip area, beard, underarm, legs,breast, bikini area Etc.

Some questions:

1. Why our diode laser produces extremely effective hair-free results?

Micro laser bar of our diode laser is imported from GERMANY to ensure effective treatment.

2. Why our diode laser continuous working time can reach over 4 hours and handpiece life span can reach 10million-15mimllion shots?

a) Powerful water circulation, use high powerful diaphragm pump, 4 times water pressure than normal pump.

b) Micro water channel makes ventilation better.

c) Cooling will stop working within 2 minutes when no laser shot, because continuous cooling will easy freeze inside of the handpiece, which easy damage the laser mould.                 

general package:

Before and after photos of 808 diode laser epilation beauty machine:

Advantages

1)   Machine protections:

a)    Cooling: when operator does not shot with handpiece, the cooling degree will automatically come to “0” in 2 minutes.

b)    Water temperature: operator could adjust a temperature number like 35 centigrade. When machine temperature reaches 35 centigrade, machine can not shot and should have a bit rest.

c)    Water flow: If water flow is not smooth, the icon of water flow will be red.

d)    Handpiece: If handpiece is not well connected, the handpiece icon on screen will be red.

e)    Any abnormal of above points, machine will stop work by itself.

2)   Reasonable parameters:

a)    Skin types: There are total 6 skin types, operator could choose different skin types for different treatments. Meanwhile, operator could also save the parameters of these skin types.

b)    Intensity: It’s from 3 to 40 J/sqm, which is real and low level.

c)    Frequency and energy: This 2 parameters are inverse ratio. Energy becomes higher, the frequency is lower by itself. This is to avoid high energy + high frequency to burn skin.

3)  Handpiece:  Germany imported micro channel bar, which could reach 10 millions shots.

4

Effective:

steady energy is achived by
a. Japan made Capacitors which stabilizes.

b. US made laser rod ensures 100,000,000shots.(every shot, steady energy)  but during our testing it went to 10 million shots.

c. 2 filters(one to filter out all impurities out of water to keep flow in high speed, and other preventing ion influx and decreasing the chances of laser bar damage.)

d. Japan made radiator tube , so water is always clean and flows fluently giving pleasant feelings while treatment.  

e. High speed DC pump made in germany, which keeps TEC chilled water flowing. 

f. 2 different power supplies , one for TEC cooling system and other for pump screen and other systems.

a)    The maximum shot number could be adjusted by software, distributor could add the maximum shots, which is good for distributors to sell more handpieces.

b)    There are 6 languages for customer to choose.

Vanoo company photos:

Vanoo expo photos:

Certificates:

Why choose vanoo?

Vanoo laser has more than 10 years manufacturing experience in beauty machines in China. We produce the whole machinery with the best quality, so our largest advantage is in the quality control and every detail of product. You know it is difficult to guarantee the quality of the product, This is the difference between us and other factory. So our commitment to customers-The best quality and most reasonable price, not the lowest price.

Welcome to our website: ,

Contact information: