Best beauty machine elight hair removal and skin care equipment

Apolo IPL beauty machine with SHR mode for fast hair removal- HS-310C  (ISO13485 ,Medical CE 1023, Factory registered in FDA) in-motion ipl technology , ipl remov hair

(APOLO:HS-300C)  (ISO13485,MEDICAL CE 1023, )

ipl&rf beauty machine

Technical Specification:

ipl&rf beauty machine

Model: HS-300C

Handpiece: 1*EPL, 1*RF

Spot Size: 12*35mm

IPL Spectrum: 420~1200nm

Filters: 1set (420/510/560/610/640-1200nm)

IPL Energy: 10-60 level (Max. 60 J/cm²)

RF output power: 200w

Operate Interface: 8" True color TFT touch screen

Cooling System: Air & Water circulation cooling system

Smart IC card build-in: Enable & Disable two functions selectable

Power Supply: 100/110V, 50~60Hz or 230~260V, 50~60Hz

How it works

E Light(IPL and RF)combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling.

When the three are united in one treatment, wonderful treatment experience and result can be
expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling.
The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light
treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.

Application

Skin tightening, skin lifting, improves flexibility and tone of skin; Skin rejuvenation: fine wrinkles, pigments, freckles, vascular lesions (telangiectasis)

 skin whitening, change large hair pores;

Hair removal;

Acne removal: improve the situation of oily skin; kill acne bacilli.

Advantages:

Designed according to abundant clinical data worked out by many famous clinical doctors;

RF energy can be applied to any type of skin;

Used in deep color skin or light color hair;

Combining with IPL, RF decreases burn risk and uncomfortable feeling significantly; No side effect;

Special designed ISL device can monitor the skin temperature to ensure a safe treatment;

Easy to operate: The handpiece tip is smart and can be applied on the skin directly

Operation method

Application of IPL :
*skin rejuvenation
*hair removal
*vascular therapy
*pigmentation therapy
*acne therapy

Apolo IPL machine advantages

1.Important spare parts of handpiece are imported from Germany, U.S to assure steady quality,  long-time working,  safe and convenient peformance. Unique design of coil and cloth to protect the tube.

2. Portable and floor standing design for more choices. 

3. Perfect cooling system to assure the temperature of the handpiece can cool down to 4°C in one minute and the highest no more than 20°C. The whole treatment will be comfortable and safe, efficient

4.Japan imported capacity to assure the safe performance, two types of filters to clean out the impurities of the circulation water for constant high water speed and assure low-temperature cooling.

4. Simple and convenient interface design

About Apolo:
A. Scale
Our company is one of the leading manufacturers in China, instead of trading company, So our price is competitive. And also Factory could offer technology upgrade but trading company could not do it as they dont have engineers. 

B. Certificate 
Our company have passed ISO 13485 system. Very few factories have passed it, as ISO 13485 is an international approval for confirming the Quality&Management system for Medical manufacturer. Some may pass ISO 9000 or 9001, as its easy to pass and only for common factories instead of medical factories.
Without ISO 13485, the environement and quality of these factories would be not regconized by developed countries.
C. Our equipment have got CE 1023 medical approval. 

Pls be noted its a medical approval, not common CE approval. Very few factoriess equipment have got CE 1023 medical approval, as CE 1023 need more strict test and very hard to pass.
With other common CE approval, you could only sell equipments to beauty salon in Europe.
With our CE 1023 approval, you could not only sell the equipments to beauty salon, but also to hospital and clinics in Europe.
D. ODM/OEM Free on design  
We're one of the most leading manufacturers in China and could offer OEM/ODM without any design fee. 

E. after-sales 
We could offer 1~2 year warranty for parts except consumable one.
We're one of the limited companies in China who have the ability to dispatch our engineers to do after-service in customers' area;

F. Free-training is offered to our customers.
When you buy our products, you should be after trained to use the product for the treatment. We have user manual, DVD and online service to teach you how to use the machine.

G Taiwan Team and American technology:

The consistently upmost quality of our products are based on advanced American technology, excellent R&D teams from Taiwan and Mainland China, comprehensive QM complied with ISO 13485 and 93/42/EEC standards.

Shipping method:

This unit will be shipped from the manufacturer warehouse overseas.

1).Ship by Express to door needs 4-5days. (DHL.TNT.UPS.FEDEX.EMS)

2).Ship by Normal air to airport needs 5-7days.

3). Sea may take around 1 month

 Welcome worldwide customers!

 IPL SHR fast hair removal beauty machine from ShangHai Med-Apolo