patient monitor system bedside patient monitor

Technical parameter                                                                                               

Alarm system                                                                                                  

Automatic audible and light double alarming include alarming review, upper limit and lower limit could modulate

ECG                                               

Optional standard three or five leads cable

Three leads: RA, LA, LL. Lead I,II and III

Five leads: RA, LA, LL, RL, V.   Lead I, II, III, aVR, aVL and aVF.

Gain select: ×0.25, ×0.5, ×1, ×2

Heart rate range: Adult 15-300 bpm/min infant/children 15-350 bpm/min

Electric current leakage: less than 10μA

Protection: 4000V, 50/60Hz isolation & withstanding voltage capacity

Anti-defibrillation protection: Anti high frequency electrotome interference

Resolution:1 bpm

Accuracy: ±1%

Arrhythmia analysis & review:Available

Respiration rate                                

Method: RA-LL impedance

Testing range: Adult(7~120BrPM)

            Children and neonate(7~150 BrPM)

Resolution: 1 BrPM

Accuracy rate: 2 BrP

Asphyxia monitoring alarm: available

NIBP                                                   

Testing method: Automatic oscillography

Testing mode: hand-actuated, fast, STAT

Auto time testing: available

Testing unit: mmHg/Kpa

Testing type: systolic pressure, diastolic pressure, mean blood pressure

Applicative crowd: adult, children, infant

Resolution: 1 mmHg

Accuracy rate: 8mmHg

Static pressure accuracy: 3mmHg

Overvoltage protection: available

Blood oxygen saturation (Spo2)

Testing range: 0~100%

Resolution: 1%

Accuracy rate: 2%(70~100%);3%(0%~69%)

Pulse rate                                               

Testing range: 15~300bpm

Resolution: 1bpm

Accuracy rate: 2bpm

Temperature                                    

Range: 0~50 centigrade

Resolution: 0.1 centigrade

Accuracy rate: 0.1 centigrade

Channel: Double

Selective configuration

1.End-tidal carbon dioxide (ETCO2)                                              

CO2 testing range: 0-13%(0-100mmHg)

CO2 testing accuracy: < 5.0% CO2, ± 2 mmHg; > 5.0% CO2, 10% of value.

Respiration rate: 3~150 BPM

Respiration testing accuracy: 1% ±1BPM

Flux control: 50~250ml/min adjustable

2.Recorder                                                            

Specification: build-in, heat array

Waveform tracings: single leads, three leads

Recording: hand-actuated, alarming, timing

Chart speed: 12.5mm/s,25mm/s,50mm/s