Hifu Cartridge /Factory Wholesale HIFU Face 1.0-10mm Lift/ Beauty Machine Skin Tightening Hifu Expression Lines Removal

1. Working principle:

Home use HIFU face lifting machine focuses the ultrasound on single energy spots by using high intensity focused ultrasound (HIFU) to generate high energy working on the superficial musculo-aponeurotic system (AMAS), so that the SMAS layer shrinks to stimulate restructuring and regeneration of collagen molecules in the deep skin.  Meanwhile, the energy skims over the skin, thus there's no need to worry about skin damage. It can also lift skin, compact facial contour and smooth wrinkles quickly.

2. How does it work?

When HIFU works on the deep skin, energy contraction happens immediately and the temperature of cells in the inner skin can quickly rise to 60-70 which is the best temperature to promote rapid reorganizing and regeneration of collagen molecules.

The HIFU has three treatment probes which are with different depth: 4.5mm, 3.0mm and 1.5mm. Different probes have different working depth. For the same part, using probes with different depth can work on SMAS, adipose layer and dermis layer respectively to generate effects of tightening and lifting as well as increasing collagen.

3. Treatment depth

4. Advantages:

1) Accurate depth

The energy focuses on the deep tissue without effect on the superficial skin. On the one hand, it works deeply with desirable effect; on the other hand, it protects the superficial skin better.

2) Latest technology positioning

It adopts the most accurate patented "Positioning indicator line" at present, which can position the energy point accurately, and the energy is also controllable, exquisite and accurate. It is safe and protective with more comprehensive effect

3) Various treatment probes

Having three treatment probes which are with different depth: 4.5mm, 3.0mm and 1.5mm. Based on different skin and depth, different treatment probes can be chosen for working on various parts of skin with good effect, such as face, neck.

5. Note:

During operation, the probe must be close to the skin without any clearance and the gel shall be fully uniform. Please do not move when the probe begins to output, and it can be away from the skin after the output indicator light stops flashing.

Operation around the eyes is prohibited; and if there are damages or pimples on the skin, such positions should be avoided. Moreover, operation must be avoided at the positions like gold wire implanting, prosthesis; and operation should be conducted one month later if collagen or hyaluronic acid or other injection is injected.

6. Machine parts

7. Operation steps:

1) For intensity adjustment, we can start from the intensity at 3.0J and output time at 1.0S. If the intensity is not powerful enough, we can increase gradually till it is workable. When the intensity is adjusted to be 5.0J and the output time to be 1.0-3.0S under an acceptable situation, the optimal effect can be obtained, and it is a normal phenomenon if you feel a slightly tingling or warm. After the operation lasts for about 20 minutes, it is a normal phenomenon if the skin is red slightly, because the energy which is generated into the bottom collagen produces heat, and then it is excreted from the skin surface.

2) During operation, the probe must be close to the skin without any clearance and the gel shall be fully and evenly placed. Please do not move when the probe begins to output, and it can be away from the skin after the output indicator light stops flashing.

3) Operation around the eyes is prohibited; and if there are damages or pimples on the skin, such positions should be avoided at once. Moreover, operation must be avoided at the positions like gold wire implanting, prosthesis; and operation should be conducted one month later if collagen or hyaluronic acid or other injection is injected.

4)When the operation starts on the neck or the cheek, the energy of the probe is recommended to be 5.0J intensity and the output time of 1S. When operate on the forehead, the energy is recommended to be 4.0J intensity and the output time of 1S.

8. Parameters:

Operating Frequency: 7MHz

Operating voltage: AC90V-240V, 50Hz/60Hz

Maximum power: 1.0-5.0J

Instrument size: 28*23*12CM

Package size: 33* 26*13CM

Gross weight: 5KG

Q1: Payment Terms

 A: T/T(Bank Transfer), Western Union, Money Gram.

Q2: Traning&Delivery

 A: User man and the video will be offered once order confirmed. Shipment will be arranged within 5-7 working days after payment confirmed.

Q3: How many days it will take to ship to me?

 A: Usually, it takes about DHL/FedEx/UPS/TNT/EMS by 3-7 working days delivering goods to your country by door to door service. It takes about 5-9 working days by air transport while customer has to pick up the goods at the destination airport. Tracking No./ Bill of Lading will be available in the next 1-2 days after shipment.

Q4: How much tax I have to pay if we import the machine from China?

A: Different countries’ customs will charge different duty tax. Please do consult your local department to check the duty before place the order.