Facial Veins Treatment 2016 Hottest Medical Laser 1064nm Tattoo Hori Naevus Removal Removal Nd Yag Laser Long Pulse Machine

Aluminum box

Remove spot and nevus
The speed of flashes could be set 3Hz/5Hz.Keep 3-4 fingers distance between head of handle and treatment area. It is better to use high energy for treatment until treatment area seeps a little blood. It is advised to use 1064 nm head for normal spot and nevus treatment, but for deep color spot and nevus, it is better to use 532nm head for treatment. It should have a 15-30days interval to continue next treatment until remove all.

2016 Hottest Medical laser 1064nm tattoo removal nd yag laser long pulse machine

Treatment Principle:

The machine utilizing the explosive effect of the ND: YAG LASER, the laser permeates the epidermis

into the dermis and takes effect on pigment mass and is absorbed by pigment. Since the laser pulses is

extremely short in nanosecond and comes with super high energy, the pigment mass would swell quickly

and break into small pieces, which will be eliminated through metabolism. In this case, the pigments

become lighter gradually and finally disappear.

Technical Parameter:

Treatment Scope:

A. Epidermal pigment: Body Tattoo, Eye line and brow Tattoo
B. Dermal pigmnet: Nevus of Ota, birth mark, Coffe Spot, Age Spot, Freckle
C. Vessels disease: varicosity removal, capillary hemangioma
D. Laser facial: oil control, skin rejuvenation, skin pore improvement

Before & After:

Features:

More Pictures:

TREATMENT THEORY

Q-switched nd yag laser radiates the light ia absorbed by the pigmentations and results in an instantaneous blast that is light blasting principle The pigmentation particles are shattered into fragments some can be bounced out of the skin and others can be splited into tiny particles that can be engulfed by phagocytes and then eliminated by the lyphatic system.

Interface

FAQ

1. Can you treat all colours?  

No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this

laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared

wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by

red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult.

This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an

existing tattoo then the darker colours will be faded or removed, allowing you greater choice of size and

colour of the cover- up design you choose.

2. Will the tattoo be removed in one treatment?

No, that is very unlikely. The light can only shatter a certain amount ink in one treatment, so several

treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades

more and more with every treatment you have. A test patch will be performed before a full session goes

ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments

 and sometimes only take 1 or 2. There are several factors that influence the number of treatments required,

these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were

used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.

3. What happens to my skin after treatment?

The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water

evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this

usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the

treatment and the skin is usually back to normal within a few days.

4. Are there any side affects?

Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very

weak. So you just need to use the energy that can make the tattoos become white, begin from our original

energy. 

5. Will the laser treatment scarmy skin?

No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the

skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments

more difficult.

Function:

1.Getting rid of tatoos ,eyebrow,Ota's nevus .
2. Acne treatment
3.Skin rejuvenation
4.Pigmentation treatment
5.Vascular treatment.
6.Eliminate and smooth wrinkles treatment
7.Professional tatoo removal machine for sale
8.Body Tattoo & Eyebrow Tattoo & Eyeliner Removal
9.Various Pigmentation Lesions such as Freckles, Sun Spots, 
10.Color Spots, Age Spots, Nevus, Birthmarks
11.Deep Facial Cleansing & Rejuvenation Assisted With Carbon Cream

1.3 years warranty, it free

of charge (except the intended damage)

2.Convenient training, user manual and operation video 

enough, we can provide the online face to face traning

3.OEM/ODM services, your logo, outshape, language, interface be designed

on your machine

CE certificate

We are professional manufacture with the best engineers and technical team, R&D team and service team.

We are warmly welcome you to visit our Company. Dear, you will be much confident for our cooperation!

Contact us

Rudy Wu

Beijing Nubway S&T Development Co., Ltd
Website:  

Email : Rudy(@)

Tel: 0086 10-51206522
Skype: Rudy.nubway   

Phone/Whatsapp/Viber: 0086 13717894662

Other hot sale products:

 Portable Hifu slimming machine           Spider vein removal machine            Diode laser hair removal machine

The premium Q-switched Nd:YAG Laser offers the light of single wavelength 1064/532nm with sequential and uniform energy output, which will be on the target tissue directly to shatter pigments cell, not damage any normal tissue. It is very safe and effective treatment procedure for various tattoo and pigment lesions.

By bonding technology, the treatment performance is more effective than previous, it is our newest development with advantages of no light leakage, no need to debug, lower than 1‰ maintenance and much longer life time.