Manufacture direct sale! Professional 2 cryo handles working together antifreeze membrane cryolipolysis

 Manufacture direct sale! Professional 2 cryo handles working together antifreeze membrane cryolipolysis 

Cryolipolysis Technical parameters of LM-S600M

Host display: 8 TFT color touch screen on host machine

Power: ≤ 500w

Vacuum: 650mmHg

Pump flow rate: 200L/min

Vacuum pressure: 0-100Kpa

Freezing temperature:  -5 to 5 degree

HEAD SIZE: large size : 167 x 63 x 86 mm
Medium-sizeL142 x57x83 mm
Small size:125x48x80 mm (You can choose 2 of them)

RF frequency: 5MHz

Operating voltage: AC220-230V 50Hz, AC110-120V 60Hz;

Interface picture

Anti freeze membrane working

Q$A

1- When a cyolipolysis treatment is performed in the body area1 (belly for example), could the cryoplolysis treatment be performed the next day in a new body area2 (buttock for example)?
----Yes, you can.

2- If a body area where a cryolipolysis treatment is to be performed is very large (belly for example), could we divide that area into 3 contiguous sub-areas?
----Yes, you can.

3.-If so, could each sub-area receive the cryolipolysis treatment succesively? what's the interval time between the treatment of each sub-area?
----It can be succesively. Interval time deponds on client's body quality. If very strong, the interval time can short, if not, please interval long.As the manual described, the solid fat cells exhaust via the liver. If you treat too much area, the liver will be very busy. If the liver is not good,The effect of fat removal would be slow and bad.

4- If we divide a body area to be treated (Belly for example) in 3 contigous sub-areas, could we perform asuccessively a treatment of 15 minutes for each sub-area? If so, the total treatment will be 45 minutes. If it's OK, will the treatment of 15 minutes for each sub-area give a good anticellulite result for the patient?
----The time of treatment deponds on the thickness of the fat and boday quality. 15 minutes is a safe treatment time. You can extend the treatment time for body can afford, but no longer than the manual suggests.

5- From the user manual, the interval time of one cryopolysis treatment is between 30 to 50 minutes. also, the interval temperature is between +5°C and -5°C. What's your recommandation for this first test we are planning to perform?
----Our recommandation is set the temperature at 2 or 3 degree, time is 15 minutes. The first test is to make sure the body can afford the low temperature or not.

More detail

  Manufacture direct sale! Professional 2 cryo handles working together antifreeze membrane cryolipolysis 

Showroom