Some issues you may come across when using this infrared hunting camera

1)Plz read the user manual carefully before using.

2)Quick delivery: 1-2 working days for the sample,4-9 working days for for quantity less 500pcs

3)Warranty:18months

4)Private labeling is available.

Please check the followings in case your camera does not perform as expected. Do not attempt to repair the camera yourself, under any circumstances.

1.The hunting trail wireless security camera will not turn on

Ensure that the battery capacity isnot low power or exhausted.

Remove the batteries and load new batteries.

2.The Camera turns off automatically

When the battery capacity is low or exhausted, the camera will turn off automatically. Try to change new batteries for outdoor using or connect AC adaptor for indoor using.

If the memory ofSD Cardis full, the camera will turn off automatically. Please transfer videos and images to your computer or delete some files in the Replay Mode.

3.Videos are choppy or jumpy when played on a computer

Ensure that the computer system requirements are met.

Ensure AVI format Video clip can be played on your computer.

Try to use a Class 6 or higher SD Card.

4.Videos do not displayed on TV

Ensure that the suppliedAV Cable is properly connected.

Ensure that the TV is set to the correct input mode.

Ensure that TV Output signal (NTSC or PAL) is set correctly.

5.The infrared hunting camera does not record videos

If the memory of SD Cardis full, transfer video clips or images to your computer or delete some files inside in Replay Mode.
The Memory card is not formatted correctly. Format the memory card again or use a new card.

6.Corrupt or unusable card

Transfer videos and photos to your computer and format (erase) the card. Try to use a Class 6 or higher SD Card.

Memory of card is full, or unrecognized file. Transfer videos and photos to your computer or use a new card.

7.Camera will not turn off
Once malfunction occurs, remove all the batteries to reset the camera.

8.Forget the password
Please enter the words “open” in case you forget the password to start the machine.