Remove Tiny Wrinkle Remove Neoplasms LCD Dispaly CO2 Birth Mark Removal Fractional Laser Skin Lightening Equipment Wrinkle Removal

Treatment theory

e-light beauty equipment CE beauty machine combines three advanced technologies:Bipolar Radio Frequency + IPL + Skin Contact Cooling 

The working theory is heating the dermis to a target temperature gradually,at that target temperature, it damages the hair follicles and prevents re-growth effectively,meanwhile avoiding injury to the surrunding tissue.A high repetition rate of single pulses are delivered deep into the dermis,achieving high average power and therappeutically effectively heat bulit-up,without the risk of injury and no pain virtually.

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

Specifications

The Ultra pulse Fractional Laser System 

The JZ-2 Generation-2 Ultra Pulse Co₂

It virtues for its 4 advantages, that is, high precision operation ,tiny thermal injury , short treatment time, quicker recovery time. With highest-integrated and ultra-high-speed Graphics Scanner, the machine could scan various of non-linear fashion with different size and shape. The scanning shape could be specially designed for customer’s different needs, either 2 modes could be chosen in the 11 scanning modes.

It also virtues as its Dynamic Balance and Compensation Install for Remedying Energy Attenuation.

The machine could automatically compensate more energy when the energy of the laser tube reduces, without needing operators reset the treatment parameters according their own experiences.

Touch Screen operating panel:

System Feature 

·Green guiding light make operation vision clearer
·For skin resurfacing and for dermatology cut/surgery.
·Various power supply for European, American and area needs.
·Smaller and lighter scanner(volume:7x4x11cm, weight:240g) for more convenient operation.
·With background set for operation time and machine use time.
·With time-accumulater for showing total operation time and machine use time.
·Friendly designed in modular for easy maintenance, with red and green light to guide it.
·Friendly designed for high safety, with warning-alarm-set. Clearly showed on the display screen.
·With energy self-replenishment system, improving the electric flue automatically to ensure real screen.
·With high cost-effective, great quality, best accessories, made by most skilled workers and engineers.
·With cooperation beauty hospital ,each machine should be first perfected in hospital, then customers.
·Committee of China Laser Standard Association, Executive of Laser Branch of china Optical Society.

Application: 

It is applied in stripping ,cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on.

Acne scars,
Surgical scars
Traumatic scars
Actinic scars
Melasma (mask of pregnancy)
Skin resurfacing (to improve texture)
Wrinkles around the eyes and mouth
Pigmented lesions : age spots/brown spots/sun spots/
Red vascular removal

Application:

1. Application Range of Fractional treatment handpiece
    a. Large pores, Fine lines, Skin tightening and whitening, Skin loosen(Deep Wrinkles), Stretch marks.
    b. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid;
    c. Reconstruction of photoaging skin.

2. Application Range of Incision Handpiece
    a. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery
    b. In cosmetic surgery, it can be adapted to incisions for Blephaplasty, Skin Tags and Ingrow Nails, Compound Nevus and Intra Dermal Nevus etc

Fractional laser working principle

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

With fractional CO₂

These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation.

As these treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional CO_{2 2}

Nicely, it can also safely treat other areas besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatment are needed for up to an 85% improvement.

Traditional full-surface CO₂

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

Scanning Mode:

Treatment Photo

Technical Specification 

Wave Length: 10.6um
Output Power: 1-30W adjustable
Micro Pulse Energy: 5mj-100mj,16 steps adjustable
Estimated Power: 125mj-1kj
Scanner Focus: f= 50mm (FFLS) or f=100mm (HFLS)
Focus Spot Diameter: <=0.1mm (FFLS) , <=0.2mm(HFLS)
Treatment Depth: 2000um (FFLS),600um(HFLS)
Conducting Beam: Green Semi-conductor laser (532nm,=mW)
Control System: microcomputer control
Smoke Emission System : Built-in air blow
Cooling System: Water cooling
Display Screen: color LCD (8 inch touch screen)
Light Delivery System:7 Joint articulated arm
Working Mode: with scanner (galvanometer scanning)
FFLS scanning area: max 15x15mm
HFLS scanning area: max 15x15mm
Scanning mode: Ellipse, Rectangular (standard)
Scanning velocity: >10m/s
CW: output power,1-30w, 1W adjustable
Ultra:  Frequency, 1000HZ, 1HZ adjustable
Treatment control: footswitch
Environmental Temperature: 5-40°C
Relative Humidity: <=80%
Machine Weight: 40kg
Machine Dimension: 450mm x 550mm x 1400mm
Power Supply: AC 220Vu22V;50HZ,3Amp.

Main Technical Parameters:    

Laser wavelength: 10.6μm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

The range of IPL treatment:

(1)Everlasting hair removal:remove unwanted hairs under arms,on legs ,lips or other body part,etc.  

(2)Pigmentation treatment:remove various kinds of pigment such as freckle,chloasma,aged spots,sunburn,etc.

(3)Telangiectasis treatment:treat angiotelec-tasis.

(4)Acne treatment:papule,tuber,Blain,acne,etc.                 

(5)Shrink pores,tighten skin,improve skin elasticity and glossiness.

(6)Eliminate and smooth wrinkles,acne treatment.