Taiwan Manufacturer Cat6A 180 Degree Unshielded UTP Straight In-Line Coupler

MIYQ Series

§ PRODUCT FACTS
The In-Line coupler provides a female-to-female feed-through connection for easy cable hook-up. It supports data transmission rate up to 10 Gbps.

§ SPECIFICATION

1.  REACH & RoHS2 compliant.

2. Meets the ANSI/TIA-568-C.2 transmission requirements for Augmented Category 6

    Channel and Permanent Link.

3. Meets Amendment 1 to ISO/IEC 11801 2nd edition and CENELEC EN 50173-1

    transmission requirements for Augmented Class E Channel and Permanent Link.

4. Meets ANSI/TIA-1096-A (FCC Part 68) and IEC 60603-7-5 requirements for RJ45

    8-way connector.

5.  Meets UL-1863 Safety Standard.

6.  Fully automatic production of PCB assembly to ensure production consistency.

§ ODERING INFORMATION

§ IMPLEMENTING PL SYSTEM

First of all, a patch cord is used to connect the switch & PL patch panel in Telecommunications Room. Secondly, connect PL patch panel & PL outlet by patch cord (Solid Wire Type) within 90m. Lastly, utilize a patch cord within 5m to connect PL outlet and computer. This simple process is called “PL (Plug-and-Link) System”.

PL system saves the time needed for installation. With the high demand of wage and production-cost to develop network systems in some countries (ex: Japan, Germany and Switzerland), the PL system is particularly ideal for your design in Horizontal Cabling.

Installations are as simple as you can imagine. After primary setup in Telecommunications Room is done, the patch cord is utilized for the connection of PL patch panel and PL outlets through ceiling, floor or raceway to complete the cabling. As an installer, you will find it to be the easiest, most timesaving, and of course, the most-saving installation you will ever experience!

PL system contains UTP&STP applications. This simple “Plug-and-Link” method offers a defaults-free installation. It is trustworthy and reliable!