High quality security display alarm stand for Mobile phone with alarm and charging

Specifications

Specification:

SloganClassical !it's affordable;

Security display holder,

The security display stand is designed for digital products distributors to protect mobile phonedigital cameraMP3MP4, etc. It can be installed anywhere of the display cabinet and the display stand. Or the 3M sticker can be adhered at the back side of the display stand. So, it can protect all kinds of exhibition products successfully. At the same time, the customers can touch and try the products freely but cannot bring away.

1   Accessories:

1). Direction regulating device

2). Wirerope retraction device

3). Fixed base plate

4). 3M sticker

2   Features:

1). Compact size

2). Install Convenience

3). Appearance novelty

4). Environment protection and energy saving

3   Applicable to :

1). Mobile phone and digital products exclusive shop

2). 3G digital showroomexhibition hallFair etc

PERFECT Alarm Function

The security alarm display holder will alarm when it happens by any way of the follow:
  1) Circuit break resistance
  2) Short circuit resistance
  3) Other circuit-replacing resistance
  4) Prying and cutting resistance
  5) Remove the sensor
  6) Cut the spring wire
  7) Put out the connector
  8) Put out power connector- alarm(above 5 minutes or more long,according to customers' requirement)
  9) When remove or pry the stand on the bottom, the anti-theft function also can be available.

Product Installation
1)Fix the holder on the the exhibition counter with the special screws.
 2)Tear off the adhesive tap,and then paste the exhibitions.
Alarm solution 
when alarm,the green indicator light will turn red immediately.Use the remote control to
send signal to the host, within 5mm, press “lock”, and the host indicator light turn
green.

Alarm test
Using remote control to send signal to host, within 5mm, press “lock” ,and the host
indicator light turn green, then press “test” to alarm test. Press “unlock” to finish
alarm test.