100-240 vac power supply ac dc 12v 6a the power adapter

INPUT REQUIREMENTS:

Operating range: 90-264VAC

Rated Input Voltage :100-240VAC

Input Frequency Range: 50/60Hz +/-3Hz

Input In-rush Current: 100A max

Input Current: 1.5A max

OUTPUT REQUIREMENTS:

Output Voltage and Current

Output Voltage Regulation

   The total output voltage regulation shall be +/-5%, including the effects of line voltage variations,load                current,ripple and noise,and the AC component of the load current.

Output Voltage Ripple

   The switching power supply shall not exceed the following limits in the indicated voltage for 60Hz or 50Hz          ripple,switching frequency ripple and noise measured with 20MHz width.

   Ripple and Noise:50/60Hz Ripple + Switching Ripple and Noise

Ripple and Noise are measured at the end of output cables which are added a

0.1uF(104) Ceramic capacitor and a 22uF Electrolytic capacitor.

EFFICIENCY:

   When 220VAC line input voltage (100-240VAC),the efficiency shall be >82% at rating load.

DIELECTRIC STRENGTH (Hi-Pot) TEST:

   Finished product withstands with AC 3000Vrms/50Hz,5mA max,

   primary to secondary, 1 minute for type test,1 second for production test.

INSULATION RESISTANCE:

   Primary to secondary: 10MΩ min at 500VDC. 

PROTECTION:

Short Circuit Protection

   If short circuit occurs,all the output should be protected. After the fault, the adapter automatically recovers.

Over Shoot

    The Output over shoot at turn-on shall not exceed 10% of normal voltage value with or without the load connected.

Start-up time

    The start-up time is less than 2 second.

ENVIRONMENTAL CONDITIONS:

Temperature

    Operating temperature:  0℃  to  +40℃

    Storage temperature :  -20℃ to  +60℃

Humidity

Relative humidity:≤95%

Operating Ambient Altitude

     Altitude:0-3000m

Operating at the lower temperature

      At -0℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

Operating at the high temperature

      At +40℃,with the rated voltage 100-240Vac charged to the primary and unloaded and full Load on the secondary 8 hours, no abnormality in electric and mechanical characteristic, after 2 hours recovery  at the room  temperature.

COOLING:

    Cooling shall be with natural convection cooling.

Burn-in

    The burn-in test will be performed at least 4 hours at centigrade

    degrees under full load Condition.

Referenced standard:

EMI Standards

    Reference  EN50082-1,EN55022-B,GB-17625.1-2003, GB-9254-1998,

    EN55013   EN55020

Safety Standards

    The adapter shall be meet certified with the following safety standards.

     UL61347, EN61347,GB4943-2001, J55013,J55020,J60065

MOUNTING CONNECTORS:

DC Output Cable

     Wire : (Optional) SPT-1  18AWG*2C  L=1200mm  Color: Black

     Plug : (Optional) 5.5*2.1*10mm

MECHANICAL FEATURES:

Dimension(Size)

     Length: 119.5mm

     Width: 62.5mm

     Height: 33.5mm

Vibration and shock

      No Evidence of any mechanical or functional damage after the vibration and shock testing.

DIAGRAM DATA:( See to attach the diagram)

APPEARANCE DRAWING:(Unit:mm)

DIMENSION OF OUTPUT PLUG & DC CORD:(Unit:mm)

Remarks:

• SPT-1  18AWG*2C  L=1200mm      Color: Black
• PLUG:  5.5*2.1*10mm

DIMENSION OF INPUT PLUG & AC CORD:(Unit:mm)

• Spec:3pin  (UL  PIN)   L=1200m,    Color:Black.
• PLUG:  C14 plug        Color:Black

Can you help me fix my own power cords???                                                                                        

Answer:  we can help you fix / find all kinds of power cords to our drivers as per your request, for example:

MOQ: 1 PCS

Payment : T/T  Western union  Paypal  Trade  Assurance

Delivery : 7 working days for sample order ,  12 working days for 500pcs 

Shipping term : FedEx  DHL  UPS  TNT

Why choose Quanzhou Smarts Electronic & Technology Co.,Ltd??                                                               

1).  Our major markets are in EU & North America,it takes about 85% markets share,that to say we do high quanlity

power suppliers only.

2).  Most of our products are approved with UL/CE/Rohs approval, our ULfile#E365202.

3).  We give 3 years warranty

4).  We accept trial orders begining.. 

5). We  have an area of 2000 square meters factory,  about 300-500 production staff. ..

Website:  

our team:                                                                                                                                                            

certifications:                                                                                                                                                     

CE, UL/CUL, ROHS approval.

factory & equipments view:                                                                                                                            

Why choose us?

1. We are UL/cUL audited LED drivers/power supplies enterprise in China.

2. Alibaba assessed 6 years Gold Supplier and more than 10 years LED industrial experience. It will guarantee your order 100% safe!

3. Price is negotiable if you have large quantity demand.

4. 100% QC inspection Before Shipping.

5. Best Quality & Best Service with Competitive price.

6. Shipping will be the most economical for you and freight cost is informed in   advance for your consideration.decision for the shipping terms will be made according to your requirements.

7. We have our engineer team, if you have any question about your LED applications, let  us know freely, we will give you the best solution.

8. Our trade manager is online 12 hours. and we will reply your inquiry within 8 hours.

9. OEM design & OEM packing welcome.

10. Samples will be ready within 7 working days

Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us !