Hot Melt Adhesive for plywood bonding

 HM-626B

                         HMA

HM-626B is hot melt adhesive designed for plywood bonding .With high bonding strength, moderate setting

speed, middling open time, excellent heat-stability and heat-resistance, HM-626B can be widely suitable for different

hot-melted equipments.

Technical Data

Composition: EVA copolymer

Appearance: Light white slice block

Toxicity: none

R&B softening point: approx. 113°C

Brookfield viscosity:

                   150℃--------aprox.19600 mPas

                   175℃--------aprox.9000 mPas

                   200℃--------aprox.3800 mPas

Heat-resistant temperature (loaded with 500g): 60~65℃

Application Instructions

Recommended application temperature:135-175℃(Don’t exceed 180℃). The viscosity and setting time

can be adjusted by changing the glue temperature, the application temperature should be adjusted based

on the practical use (raise 5℃in winter).

The cover of glue tank should be closed after filling adhesive lest the adhesive might be polluted.

If the plant line stops for over 2 hours, the glue temperature should be tuned down to about 100℃to

avoid the aging of adhesive influencing the adhesion performance. If the applicator stops for over 8 hours,

the glue in tank should be emptied.

HM-626B should not be mixed with any other type of adhesive

Packaging and Storage

Shelf Life: 12 Months in dry and cool environment

Packaging: 25 Kg/bag

Cleaning:

The glue tank should be cleaned by paraffin or naphthenic oil, MSDS should be consulted for proper

handling before use.

Warnings:

Wear goggles and adiabatic gloves when filling hopper or pot.

Keep plant ventilated and forbid any fire.

Consult MSDS or our technicians before use                       Version: 1.0 Update: Jul. 2014