OBD GPS Tracker

Data Logger, Save 1.500 position points and retrieve them when when the converage is recovered

Events in SMS to Programmable cellphone, check the

vehicle position through SMS and get a reply with a link to display the vehicle over the google map.

GPS Receiver Architecture

- Later Sirf Chipset architecture

- 66 parallel Channel

- L1 1575.42 MHZ

- C/A Code (1.023 MHz Chip rate)

- Code Plus Carrier tracking (Carrier aided tracking)

- 24 simultaneous satellite vehicles

- < 15 s typical TTFF-hot

  (with current almanac, position and time)

- < 90 s typical TTFF-cold

- <1.0 s internal reacquisition (typical)

Dynamic

- Velocity : 1000 knots (515 m/s)

- > 1000 knots at altitudes < 60,000 ft

- Acceleration: 4 g

- Jerk: 5 m/s3

- Vibration : 7.7G Per Military Standard 810E

Positioning Accuracy

- Less than10 m SEP without SA

- 1-5 m typical in differencial  mode

- Timing Accuracy  (1 Pulse Per Second, 1 PPS)

- UTC 500 ns with SA

Altitude

- 60,000 ft. (18 km) (max.)

- > 60,000 ft. (18 km) for velocities < 1000 knots

GPS Antenna

- Active Micro strip patch antenna module

- Powered by receiver module (5-80 mA @ 5 VDC)

Datum

- WGS-84

- Factory definable datum

I/O Messages

- Latitude , longitube, height, velocity, heading time plus others

- Hunterpro Property protocol

- 1 PPS Output rate: latitude, longitube, height, velocity, heading

time, 6 I/O State, evetns data, vehicle conditions

- Remote programmable features

Power Consumption

- 40 mA / 12 VDC (GPRS And GPS Active)

Dimensions

- 100* 70 * 20 mm.

Weight

-0,310 kg

I/O Pins

- 3 digital inputs (panic button, possitive trigger, digital input, 8 seg delay and bettary sensor)

- 2 digical outputs (kill engine, and A-B digital output)

Connectors

- Data / Power: DB15 with cable.

-GPS Antenna: Straight SMA Conntector with coaxial cable

Advanced Features

- Dispatch ready using SMS/GPRS, i.e find the closest address to point

Operating Temprature

- Receiver module: -20c to +60c

Humidity

- 95% non-condensing +30C to+60c.

Other Opetional Accessories

- HP-Kam, JPEG Camera.

Optional Accessories

- External Bettary Power supply

- (OUTPUT A-B) Relay

- Voxful Module

- Passenger Counter

- LCD Display

- L And U OUTPUT can be converted into digital input.

HP-KAM Features

- Automatic picture sent once the panicbutton get triggered.

- Infrared led.

HP-KAM Compatibility

- Compatibility with the standard XP60FC

-Review the taken pictures from the HP-WEB Server.

HP-KAM Images