2016 Upgraded Recipe WER China Digital Printing Machine Solvent Ink

2016 upgraded recipe WER China digital printing machine solvent ink

Features
The type of Seiko solvent ink has better chroma luminance and color saturation
It can flow out of the print head smoothly, the viscosity will change to a small extent as the temperature alters. When being used, the product will not have discontinuous problem or clog the print head
It may corrode the print head in a lower degree and has exceptional stability in respect of intermittent printing, long-term storage as well as printing at either high or low temperatures
The light fastness of the pigment contained in the solvent ink is at 7 to 8 level. Accordingly, the product is excellently sun-proof. Furthermore, on the print media, it has the ability to resist water, scraping and grinding.
Our product has little odor, no pollution to environment and no damage to human body. Thus, it is truly eco friendly.
The print media can be applied to include photo paper, pvc foam board, car sticker and flex banner

Other information
The packaging method is available in three types, 1liter/bottle, 4 liters/bottle and 5 liters/barrel
The shelf life lasts 12 months at least. When stored, the product should be sealed and put in environments that are light-proof and have normal atmospheric temperatures
Attention should be paid to the fact that this type of solvent ink is not compatible with other kinds of products. As a result, before putting the solvent based ink into the print head, the operator should first well cleaning up the ink tube and print head with the cleaning solution

Key points on using WER inks
1. Follow our instructions/using suggestions to flush out the whole ink supply system with our cleaner before using WER inks for the first time.
2. Before changing WER inks with other brands to products, you are suggested to  for a long period of time, try to turn on and run them at least once a week to ensure the clearance of ink paths and print-heads

Precautions before changing to WER ink
1. Make sure the equipment/printer runs properly under normal working conditions.
2. Completely discharge remainders of the former ink product.
3. Flush out the whole ink supply system with cleaner offered by the previous ink supplier. Then flush out the whole system again with our cleaner.
4. Make the ink tanks dried before recharge WER inks.
5. After recharge WER inks into ink tanks and set those tanks properly in ink supply system, you can start a trial print.