quad cameras control box XY-3028

  Thanks for purchasing our production. Correct installation and operation can make your driving safely and conveniently. Welcome to purchase our Front View Camera, and Rear View Camera  for this system.

1. Parameters:

The system working current: Max: 50MA. (Excludes working current of cameras)

The system working power: 9-15V.

System signal: PAL/NTSC/

Video output: 1.0VPP/75Ω

Working temperature: -20℃-80℃

Operation Temperature: -40℃-85℃

2. Description:

Video output: Two videos output, one for car monitor, the other for car DVR.

Front view camera power: supplied by control box system.

Rear view camera power: supplied by control box system, or could be supplied by reverse lamp power. 

Left/Right side view camera power: supplied by control box system

Attention:

For stable working, control box system power supply must connect to ACC Power, can’t connect to car battery directly.

Front/Side view camera power should be supplied by control box system. 

Control box system power supply is the same as ACC power supply, so the cameras working power should be the same as ACC power.

Control box system Monitor Trigger wire should be connected to Car Monitor reverse wire, so that the system will activate the car monitor . 

Control box system wiring (or other device wiring) should not close to fuel tank, to avoid any danger.

Functions:
1. Automatically rear view and front view: 

When you pull the reverse gear (Left/Right turning no triggered), the system will activate the monitor and rear view camera till the reverse gear back, then it will automatically switch to front view camera for 10 seconds then shut off.  

2. Manual switch control mode:

Front/Left/Right/Rear view could be controlled by Up/Left/Right/Down direction pulling the manual switch.

Pull the switch Up/Left/Right/Down, car monitor and corresponding camera will be working all the time, if no other trigger working. 

Then you could shut off the camera video by pulling the switch towards same direction again.

3. Side view mode:

When you turn on the turning switch, this system will activate Monitor and Side view camera (Left/Right side view camera is controlled by Left/Right steering lamp). The monitor and camera will turn off after 1.5 seconds when steer turning is finished.

Welcomes All Customers Vistor Our Factory and Happy to do Business with all overseas
Note:We have strict producing process, aging test and QC to make sure high quality production.
We have established systematic production standard in waterproof,shockproof,temperature resistance,
humidity resistance,high definition.

competitive advantage 
1.Stable quality (CE FCC ROHS)
2.Most competitive price
3.On time delivery
4.Good aftersales service
5.All products must test one by one wartproof resistance and high/low temperature resistance
6.Warranty:16months
7.OEM,ODM welcome

Guangzhou X&Y Electronics Co., Ltd. was established in Guangzhou in 2005. We are a hi-tech enterprise engaged in the R&D, production, and sale of car camera system,car DVR camera.We guarantee punctual delivery, competitive price and prompt response. We welcome your inquiries and look forward to establishing long-term business relationships with you in the near future.