Ethylene Vinyl Acetate base computer accessory/coumputer parts hotmelt adhesive glue stick

1. 25KG/Carton
2. We can pack the goods according to customers' requirements

Product description:

Main Features:

1) Strong binding strength

2) Good yellowing resistance

Main apply to:

Packing,especially for EPE Foam sheet,Ceramic,Tile,toys,handicraft,plastic products,decoration of Light and lamp,clothing,wooden products,electronic components and equipment,computer accessories and assembly.

Storage:

Store in a cool and dry place,out of direct sunlight,and prevent exposure to temperature extremes,best store temperature condition between 5℃ and 20℃.

Shelf Life:

Best used within 24 months from date of manufacture when stored under the above conditions in the original unopened containers or packing.

Notice:

1. Surface to be bonded should be clean,dry,free of loose particles.Wipe plastic and metal surfaces with solvent(eg.Acetone)
2. Smooth surfaces are more difficult to adhere than rough,or porous surfaces.
3. Joint as quickly as possible for keeping optimum binding strength.
4. Apply firm pressure and do not adjust joint has been made.
5. If substrates could be pre-warmed to 60℃ at least,eg metal surfaces,the stronger bond strengths will be achieved.
6. Opening and Curing time will changing along with the changes of Temperature Glue,Coating,Environmental
7. Melt System with high temperature,In order to avoid scald,please put on protective goggles and gloves when operation,do not use hand to touch.If scald,please put scald place immersion in water at least ten minutes,then go to hospital for further treatment.
8. General hot melt glue achieve around 50% bond strength after 1 minute,and 75% strength after 1 hour.

Sample free.

More similar products show:

About our factory:

Our factory is specialize in Hot melt adhesive products,such as Hot melt adhesive glue stick,Hot melt adhesive granule,jelly glue(Glue block),Hot melt adhesive glue powder,Hot melt adhesive glue film,pressure sensitive adhesive,etc. The synthetic resin based including:EVA,EEA,EAA,EVLA,PO(Polyolefin),PE(Polyethylene),PP(Polypropylene),PES(Polyester),PU/TPU(Polyurethan),PA(Polyamide),SIS,SBS etc.

The products are widely used in packaging,medical,hygiene,electronic components,plastic, metal,wood,toys,furniture,handicrafts,ceramics,tile,shoes,book binding,automotive,cloth&fiber,luggare&bags etc

All the products meet the RoHS standard and passed the testing of SGS.Good quality,excellent performance,fast delivery and good service for you,if any I can do for you,pls feel free to contact me, it is my great pleasure.

Procedures of order:

FQA:

Our certifications: