Trapezoidal Profile Roofing Floor Deck Roll Forming Machine

Equipment and Qty.

Decoiler

1 set

Main roll forming machine

1 set

PLC control station

1 set

Hydraulic station

1 set

Post cut

1 set

Electric motor

1 set

Runout table

1 set

Processing material:galvanized plate

Material thickness: 0.8- 1.5 mm or as customer's requests

Material hardness: 195 mpa---350 mpa 

Forming speed: 8-12 m/min

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Loading capacity:5 T  

Uncoiling width:1200 mm

Inner diameter: 450-550 mm.

Size of the main part: about

12500 *1850 * 1500

Weight of main part:11.5 tons

Voltage: 380 V/50 HZ 3 Phase or as your required

Roller fixer : middle plate

Frame : 400 mm H beam steel welded

Drive mode: case of differential

Material of rollers: 45# steel, surface hard chromium plating.

Material of shafts: 45# steel

Diameter of shafts: φ 90 mm

Number of rollers : 24 rollers

Main power:18.5 kw

Feature : Ensure stability, precision and cutting speed

Function : Automatic cutting controlled by P LC

It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.

Material of blades: Cr 12 quenched

Power supply : hydraulic power

Components: It contains one set of blade, one hydraulic tank and one cutter machine.

Hydraulic Station

It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job

Power: 5.5 kw

Hydraulic oil: 46#

Components: The system includes a set ofhydraulic tank, a set of hydraulic oil pump,2 hydraulic pipes. And 1sets of electromagnetism valves.

Feature:

1.Adopted PLC, frequency converter, Delta from Taiwan to ensure high speed with stability, precision and lifetime.

If you need, we can change it other brand or little computer type for touching screen.

Payment terms

Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment.  

Delivery:within 45 working days after receipt of deposit.

Warranty

1. Two years guarantee, and we will provide the technical support for the whole life.

2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD50/person/day for salary, one technician needed.

4. Training time: one week (contains the time of installation and adjustment)