composite decking idears

  composite decking idears    

1. TS-04B & project show :

2. Specifications 

  composite decking idears   

 Packaging &shipping  about  composite decking idears   

1.The pallet length based on the composite deck board length.

2.The package can be also based on the customer request.
3.The transport way is FCL, LCL. 

4. Loading quality /20FT: about 7300m(1110m2)

 Installation is easy !

   composite decking idears 

1- How to install WPC outdoor floor?

Generally, it should install keel first. Fix the WPC board on the keel using nail gun, and then plug another WPC board. One after another till the installation is finished.

2- How long is the service lifetime of WPC floor?

A: It is about 25-30years under ideal situations.  

3- Do WPC products need painting? 

As the difference with the wood, WPC products themselves own color, they need not extra painting.

4- What color can you provide?

Generally, we provide 8 main colors as Cedar, yellow, red pine, red wood, brown, coffee, light grey, blue grey. And also, we can make special color per your request.

5- How to make the defective Restoration? 
We recommend sanding the finish of the surface. After sanding , some of the plank will get back to the original appearance.

6- How to due with the Rust Stains, Ground-In Dirt and Grime? 
You can use a cleaning product containing oxalic or phosphoric acid base to lighten or remove the rust or dirt.

7- The problem of Oil and Grease Stains? 
Scrub in a household-degreasing agent as soon as the stain occurs. Rinse with hot 
water.

8- How to get rid of the Ice and Snow? 
When in the snow and ice whether, We can use the Calcium chloride or rock salt, available in 
many home centers, will melt ice on WPC material decking.

9- How to clean the dirty covered? 

If the deck is dirty, it just need a soft brush ,and some water and the eradicator ,Firstly, 
put the water and eradicator together on the dirty place, and then brush the deck plank.

10- How to treat the Scratches, Nicks, Cuts and Grooves?

Scratches, nicks, cuts and grooves can be eliminated by using a wire brush. Brushing will need to be consistent with the grain of the product and the brushed area will weather back in approximately 5-10 weeks.Surface scratches and abrasions on these planks will fade after weathering. Once they have fully weathered, they are more resistant to visible  scratching.For deeper scratches a soldering iron can be used. By applying heat to the scratch with a soldering iron, the damaged area will be less visible.

         Title :   composite decking idears