jaw crusher,stone crushing,stone crusher machinery

The usage and application range

1, This series of jaw crushers are mainly used to crush ore and rocks of medium and above hardness for medium and fine crushing in the industries of metallurgy, mine, chemical industry, cement, construction, refractory material and ceramics. 

2,This series of crusher is most suitable for crushing the ores whose compressive strength is not less than 320MPA. The maximum blocks of materials to be crushed must not be more than the dates listed in the technology parameter. 

General structure

The jaw crusher is mainly composed of fixed body, rotating body, safety device and adjusting device. 

1. Fixed body: The main components of the fixed body is rack, which has two manufacturing engineering: carbon steel casting rack and carbon steel plate welded rack. Welded rack uses the reinforced stiffener on the basis of the original cast rack, and through strict quality control and specific process requirements to achieve the same effect as casting rack. In order to prevent the serious wear of the lateral wall, crushing chamber is equipped with a shield on the left and right side, which can be easily replaced. 

2. Rotating body: it is composed by moving jaw, eccentric shaft, bearings, pulleys and other parts, is the main part of the jaw crusher transmission and endurance. 

a. Moving jaw is composed by movable jaw bracket and movable jaw plate. The movable jaw bracket is made of 35 # cast steel, and goes though quenching and tempering treatment. 

b. The eccentric shaft is made of 45 # steel, and goes though quenching and tempering treatment. 

c. Bearing adopts an aligning spherical roller bearing, with characteristics of fine-tuning, big endurance and durability. 

d. Jaw plate is divided into mobile one and fixed one. In order to enhance the crushing effect, the surface is made of optimized tooth type with ZGMn13 material which has high hardness and wear resistance. 

3. Adjustment device: it is used to adjust the size of discharge opening and control the discharge granularity. Our jaw crusher adjustment device has two forms: long wedge type, and plunger gasket type with convenient and flexible adjustment, can achieve stepless adjustment. 

Features and functions 

1. The cavity of jaw crusher is deep and no dead area, so it prompts the feeding capacity and output. 

2. The size of the reduction ratio is big and the production size is even. 

3. Adjustment device of the spacer style discharge mouth is convenient and reliable. And jaw crusher's adjustment range is big, which improves the flexibility of equipment.

4. Safe and reliable lubrication system, convenient replacement, small maintenance work load.

5. Simple structure, reliable operation and low operation cost.

6. Energy conservation: single machine's energy conservation is 15%-30% and the machine system energy conservation is more than twice of the single machine.

7. The adjustment range of the outlet is big, so it can satisfy the requirement of different customers.

8. Low noise, little dust.