Automatic Switch Ceiling Mounted IR Motion detector for Light

Automatic Ceiling Mounting Infrared Motion Sensor for Light Use With High Sensitivity

Feature:

1) Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work day and night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to testing.

2) Detection distance can be set according to installation position and detection field.

3) The power show and detection show: they will flash one time each 4 seconds after putting through the power, and flash two times per second when receiving the signal. At the same time, it shows the sensor in the normal conditions for detection.

4) Time-delay added continually: when it received the second induction signal after the first inductor, you should compute time once more on the rest of the first time-delay basic. (Set time)

5) Time-delay adjustment: it can be set according to your desire. The minimum is 8+/-3 sec; the maximum is 7+/- 1min.

Locking function: during working, sensor will keep load lighting when power is shut off 2 seconds and then on. And shut off the power for 4 seconds and then on, sensor will resume automation.

Technical Paramters:

Power source:220~240V/AC, 100~130V/AC
Power frequency:50HZ/60HZ
Time setting: min:8±3sec  max: 7±2min
Detection angle:360°
Detection range (22°C):8m max. dia.
Rated load:1200W (220~240V/AC)
                   800W (110~130V/AC)
                   3000W (220~240V/AC)
                   1500W (110~130V/AC)
Ambient light: <3lux~daylight
Working temperature:-10~+40°C
Power consumption:0.45W (static 0.1W)
Detection motion speed:0.6~1.5m/s
Installation height: >3m
Working humidity:<95%RH
IP:20