High Quality HDMI Matrix 4 x HDMI 1.4 4K *2K

Specifications

1. Introduction

   HDM-944 is a 4-by-4 DVI/HDMI matrix supporting output resolution up to 4Kx2K. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on any of four displays simultaneously, no matter the source is HDCP encryption or not. Extra infrared receiver port is supplied for remote control. HDM-944 offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, data center control, information distribution, conference room presentation, school and corporate training environments, etc.

2. Features

1. Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

2. 3D HDMI 1.4a video format support.

1. 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.

2. Supports deep color up to 48-bit per pixel.

3. HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).

4. Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.

5. Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.

6. Operates for TMDS clock frequencies up to 300MHz.

1. Package

1. HDMI Matrix ------------------------------------------------------------------------------------ 1PCS

2. Adaptor ------------------------------------------------------------------------------------------- 1PCS

3. Operation Manual ------------------------------------------------------------------------------- 1PCS

4. Remote Controller---------------------------------------------------------------------------------1PCS

1. Specifications

1. Frequency Bandwidth            2.97Gbps

2. Input Ports                      4 x HDMI Female input ports

3. Output Ports                       4 x HDMI Female output ports

4. Power Supply                       DC 12V, 2A

5. ESD Protection Human Body Model:   ± 8kV (air-gap discharge)

   ± 4kV (contact discharge)

6. Dimensions (mm)                 113(W) X 260 (D) X 26 (H)

7. Weight(g)                         750

8. Operating Temperature                      0°C ~ 40°C / 32°F ~ 104°F

9. Storage Temperature                -20°C ~ 60°C / -4°F ~ 140°F

10. Relative Humidity                 20 ~ 90% RH (Non-condensing)

11. Power Consumption (Max)        20W

1. Operation Controls and Functions

   Front Panel

1. ON/OFF: Power on/off switch.

2. POWER:This red LED illuminates when the device is connected with power supply.

3. IR IN: Remote control signal receive.

4. OUTPUT A:Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when the output select to the corresponding input.

5. OUTPUT B:Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when the output select to the corresponding input.

6. OUTPUT C:Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when the output select to the corresponding input.

7. OUTPUT D:Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when the output select to the corresponding input.

              

   Rear Panel

1. INPUT PORTS: LED1-4 illuminate when the HDMI signal plug in INPUT 1-4 port.

   INPUT 1-4 ports are where you connect the HDMI source.

2. OUTPUT PORTS: LED A-D illuminate when the TV plug inOUTPUT A-D ports.

    OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable

3. RS232: This port can control the matrix via PC.

4. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

   Right Panel

1.         EDID Selector: SelectHDMI output signal format via EDID Selector.

VI.  Application Example

VII. Remote control

1. Remote control

OUT A: Press 1234 button will to select input source to HDMI OUT A, and the LED will indicate the corresponding input source.

OUT B: Press 1234 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source.

OUT C: Press 1234 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source.

OUT D: Press 1234 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source.

VIII.  Matrix controller user guide

1. • Installation

     Matrix controller is green software. Just use a cable to connect the PC via RS232 port and copy “MatrixController.exe” to PC to complete installation.

     Preparation

1. Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE)

2. Power-up Matrix

3. Double click MatirxController.exe icon to run it

   Introduction

• “General” Page: