High speed 6 by 2 HDMI Matrix with Dual ARC, support 4k2k

Specification

Frequency Bandwidth                        2.97Gbps         

Input Ports                                        6 x HDMI Female.

Output ports                                     2 x HDMI Female; 1x Toslink; 1x Earphone    

HDMI Audio Output                           PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD

Power Supply                                   5V/2A DC (US/EU standards, CE/FCC/UL certified) 

ESD Protection                                 Human Body Model:    ± 8kV (air-gap discharge)

                                                                                         ± 4kV (contact discharge)                     

Dimensions (mm)                              250(D) x110 (W) x 26(H)        

Weight (g)                                        720      

Power Consumption(max)                 10W    

Operation and Fuctions

Front panel

1.           ON/OFF: Power on/off switch.

2.           Input LED: These green LED illuminate when the output select to the corresponding input.

3.           EDID LED: These green LED illuminate when the audio EDID select to corresponding audio.

4.           ARC LED: This green LED illuminate when the ARC function open.

5.           POWER LED: This green LED illuminate when the device is connected with power supply.

6.           OUTA KEY: Press this button to select the input source to HDMI OUT A.

7.           OUTB KEY: Press this button to select the input source to HDMI OUT B.

8.           EDID KEY: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio output mode.

9.           ARC KEY:Press this button to open or close the ARC function.

10.        RST KEY: Press this button the matrix will reset to factory state(INPUT1, 2.0CH AUDIO MODE,ARC function closed)

11.        IR: Remote control signal receive.

Rear panel

1.           Input Source: These slots are where you connect the HDMI source output from DVD, PS3.

2.           HDMI OUT: This slot is where you connect the HDTV or monitor with HDMI cable.

3.           Stereo OUT: This slot is where you connect to the speaker with 3.5mm earphone cable.

4.           Toslink OUT: This slot is where you connect to the amplifier with optical fiber cable.

5.           DC IN: Plug the 5V DC power supply into the unit and connect the adapter to AC wall outlet.

Shipping