Single Output Switch Power Supply (S-15)

Model

Specification

S-15-5

S-15-12

S-15-24

DC output voltage

5V

12V

24V

Output voltage error (Note2)

±2%

±1%

±1%

Rated output current

3A

1.3A

0.7A

Output current rage

0-3A

0-1.3A

0-0.7A

Wave and noise(Note3)

50mVp-p

50mVp-p

100mVp-p

Inlet stability(Note4)

±0.5%

±0.5%

±0.5%

Load stability(Note5)

±1%

±0.5%

±0.5%

DC output power

15W

15.6W

16.8W

Efficiency

65%

68%

72%

Adjustable range for DC voltage

±10,-5%

±10%

±10%

AC input voltage range

85132VAC/170264VACselected by switch

Input current

0.5A/115V 0.25A/230V

AC impulse current

Cold-start current 15A/115V 30A/230V

Leakage current

<0.5mA/240VAC

Overload protection

105%150%Typecurrent limiting;  Reset: auto recovery

Over-voltage protection

High-temperature protection

Temperature coefficient

±0.02%(050)

Setup rise hold up time

200ms,100ms,30ms

Vibration

10500Hz,2G 10min./1cycle,Period for 60min,Each axes

Withstand voltage

Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC

Isolation resistance

Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms

Working temperature and humidity

-10+60,20%90%RH

Store temperature and humidity

-20+85,10%95RH

Overall dimension

99*97*35mm

Weight

0.3Kgs

Safety standards

Meet UL 1012 requirement(Not apply for the mark)

EMC standards

Meet FCC Part 15J Conduction Class B

Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2311must be knocked down.