60leds per meter WS2812B Digital LED Strip Light

Specifications

60leds per meter WS2812B Digital LED Strip Light

Digital led strip light Parameter

Different waterproof

IP40: Non waterproof, 3M backside

IP65: Glue drop on the front side, 3M tape backside

IP67: Silicone tube protection

IP68: Silicone tube+glue

Features

1)   Controlled by a program built-in a SD card to realize different amazing effects

2)   We can also make programs according to your requirement;

3)   Every led can be controlled independently;

4)   Easily bends and installed by backing 3M adhesive tape;

5)   Firm connection and every leds can be cut off.

Notice

1. Please use DC5V only;

2. There are direction arrows on the PCB, arrow direction for connecting next reel strip;

3. GND not only for power wire, also as signal wire, need connect to both power and controller;

4. The Max distance between strips is 5m-10m, need use amplifier when more than 10m;

5. Every 5m strip need re-connect to power supplier, avoiding voltage drop;

6. Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED;

7. DO NOT attempt to make sharp bend with the strip;

8. DO NOT install where water or high humidity may be present without further protection;

9. Away from strong acid or strong alkali.

Application

1)   Architectural decorative lighting

2)   Canopy and bridge edge lighting

3)   Amusement park, theater and aircraft cabin mood lighting

4)   Landscape lighting, under shelf lighting

5)   Indoor or outdoor illumination

7)   Parties decoration