5v 12mm digital rgb pixel led for outdoor signs       

        RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They're typically used to make outdoor signs.

Full color bare lattice light can carry out the effect of RGB full colors changing gradually, jumping, 

running water, chasing, scanning, writing and so on. It is suitable in digital RGB illumination letters, spurts draw, 

channel letters, various kinds of light source of illumination facility inside and outside, abnormal shape display, 

and can replace the advertising sign of neon light. 

Advantages:

Special design, install directly into holes, no tools and technology, quickly. 

waterproof rgb bare lattice light, rgb full color led, through hole led:

1. High quality with cheap price provided

2. voltage: DC5V

3. protection class: IP68

4. Product size: 12mm

5. light intensity(mcd/pcs):1800-2500

6. pixel controll with IC board inside for luminous characters

7.A string lamp can carry out the effect of RGB full color changing gradually, the jump, running water, chase, scanning, letter writing and more
Provides various dynamic effect of different colors or luminance
Safe, energy-saving, long lifespan and maintenance-free
Suitable for digital RGB illumination letters, spurts draws and channel letters
Various kinds of light sources of illumination facility inside and outside anomalous display Origiinal product picture:

Installation:

1. According to the wiring diagram, from the IN signal P1 to install the lights in order. Not using tools to carry the lights for installation, which would be break the IC, also please handle with care when remove the lights.     

Cautious: P1 connects with the first light of the IN port, if there is P2, P3..., then P2,P3…connects with the first light to the other two-ways of IN Ports.

P1: P is controller output port, number “1” is the port cord. . 

*** Our company would provide specific wiring diagram, clients could make proper installation accordingly)***

2. Wiring: Connect lights with driver in 2.5square line. Plus-n-Minus of the lights connect to the power line (no opposite), weird firmly, then using the insulating tape wrapped the thread of lines to avoid short circuit or leakage.          

3,Connect with Power: Not all the driver’s rated power reaches the standard, the better is to make discount on the theoretical data (80% at least). Finally double check the line connection before power on. 

4. Controller: The controller’s output signal line is heart-bus with three metal plates word first signal input ( the public mind line) connects, with a controller in the following line of signal lights(that is, white, green, blue lines)is the end of the string from scratch. Regular signal line’s length is 3~5m max.

Application

1.Backlight of signal, used in channel letter,signs,light box 

2.Stores,supermarkets,mall,hotel board sign

3.Window display lighting

4.Emergency hallway lighting

5.Auditorium walkway lighting

6.Cove lighting

7.Architectural lights for canopy, corridor, window, archway

8.DIY lighting for indoor use

9.Path or contour marking

10.Decorative lighting for festivals, events, shows, exhibitions