China Thrust Ball Bearings Factory 51104

 Bearing manufacturer, Thrust ball bearing 51104

NO.2 Thrust ball bearing Characteristics :

1. Thrust ball bearing Equipped with one-way, two-way two types

2. In order to allow installation error, either one-way or two-way, can choose spherical self-aligning spherical seat cushion type or with spherical seat type.

3. High quality steel - used can extend bearing life highest 80% super clean steel

4. The height of the grease technology -  lubricants technology can make the life of the grease to extend and improve the performance of the bearing

5. The high grade ball - quiet and smooth when high-speed rotation

6. Use of options in the ring, can allow installation error.

NO.3 Thrust ball bearing Application :

Thrust ball bearing applies only to bear a part of the axial load and low speed, such as crane hook, vertical pumps, vertical centrifuge, jack, low speed reducer, etc. The shaft of the bearing ring, seat ring and rolling body is separate, can be installed separately.

 NO.4 Thrust ball bearing about us:

1.Your inquiry to our product & price will be replied within 24hours 

2.Well-trained & experienced staff are to answer all your inquiries in English of course. 

3.OEM & ODM projects are highly welcomed. We have strong R&D team here to help. 

4.Your business relationship with us will be confidential to any third party. 

5.Good after-sale service offered, please get back if you got question

Brand: X&Y WYP SRBF;as your requirements,we can do the brand as your needs.

Service:OEM,Buyer Label Offered,Design Service Offered.

Company Certifications: ISO9001:2008,BV,CE

Main Markets:

Eastern Europe,South America,Domestic Market, Brazil,Russia, North America,Turkey etc.

Main Products:

1,Ball Bearings (Deep Groove Ball Bearing, Angular Contact Ball Bearing,  Thrust Ball Bearing, Self-aligning Ball Bearing);

2,Roller Bearings (Taper Roller Bearing, Cylindrical Roller Bearing, Thrust Roller Bearing, Spherical Roller Bearing);

3,Pillow Block Bearing

What is the difference between a seal and a shield on ball bearing?

Why can't we just use all seals instead of stocking both shields and seals?

Ans: The shield is attached to the outer race and it is a clearance between the outer and inner race. 

On the other hand the seal is attached to the outer with the inner race. 

The main reasons of not using seals in all applications instead of shields, are: 

1. Speed 2. Heat and 3. Starting Torque 

The seal could cause problems in these areas due to its rubbing against the inner race and in the case of 

shield, there is a clearance between outer and inner race and then there is no such kind of problem.

1 

On single row deep groove type seem to be loose when shaken. Are these bearings loose internally?

Ans: No, everything is fine. The bearing must have a slight amount of movement. This is necessary for running 

clearance, so it does not bind. And say, before for doing this, remember to take a second to wipe off your fingers.

If any items you interested, feel free to contact me!