single rack stand acrylic shoe display

Company profile:   

Established in 2005, our company and factory are located in Shenzhen.owned customes distubuted in Euopean ,south American , North Amercian , and any other countries . 
The main project of the first manufacturing department is acrylic product, we can handle injecting ,silkscreen printing,sandblasting ,cutting and milling , polishing , bending to shape , spray painting ,precision carving , laser incision and so on technology for advertising display. and so on 
1. 8 years experiences of professional display manufacturing. 
2. serverd several worldwide customers. 
3. a capacity of 30,000sets displays per month. 

Our factory:  

Our showroom:  

Q: What is acrylic made of?

A: Acrylic is a transparent thermoplastic known as polyacrylate and is derived from natural-gas. It is a composition of Methyl Methacrylate (MMA) and Poly Methyl Methacrylate (PMMA) resin. In short, it’s a petroleum-based product, so petroleum solvents and chemicals should always be avoided to prevent marking the surface.

Q: What is the difference between acrylic, Plexiglas, Lucite, Perspex, and Lexan or clear plastic?

A: Acrylic (polyacrylate) is marketed under many trade names including Plexiglas, Lucite, Perspex, Policril, Gavrieli, Vitroflex, Limacryl, R-Cast, Per-Clax, Plazcryl, Acrylex, Acrylite, Acrylplast, Altuglas, Polycast, Oroglass, Optix.

These differ from Lexan which is polycarbonate, and is sometimes used as bullet-proof glass. Although it is more shatter-resistant, it is more expensive than acrylic, yellows with prolonged exposure to sunlight, and is much more easily scratched. Therefore acrylic is more ideal for most interior and exterior design purposes.

Clear plastic can refer to a wide range of synthetic compounds, with varying strengths, melting points, and other properties.

Q: How do I clean acrylic?

A: Acrylic care consists of no more than normal wipe-cleaning to keep it looking new. Chemicals should never be used, and care should be taken to avoid scratches. Use a mild soap & water mixture with a gentle cleaning cloth. Do not use ammonia based cleaning solutions on the acrylic as it will eat into the sheet and cause it to craze.

Q: How can I remove scratches from acrylic?

A: Removing acrylic scratches (ones that you can see or feel by passing a fingernail over them) can be accomplished by using Novus2 or Novus3 cleaner, depending on the severity of the scratch. These are available on our Product Care page.

Q: Will acrylic melt?

A: While acrylic softens at higher temperatures, it does not actually melt until it reaches 320 °F (160 °C). Therefore, normal household use does not risk melting acrylic. Hot stovetop items should only be placed on an acrylic tabletop surface using a protective trivet or other padding, preferably with rubber cushions. As a safety precaution, never place acrylic directly on or next to an open flame or hot surface.

Q: Should I keep acrylic out of the sun?

A: No, sunlight will not affect your acrylic items. All plastics come from petroleum and natural gas. Sunlight, especially ultraviolet radiation, has a disastrous effect on most plastics. This is why many children’s toys become brittle and crack when left outside. Acrylic is derived from natural gas and is completely inert in its solid form and will NOT yellow in the sunlight.

Q: Is acrylic the same as “bullet-proof” glass?

A: No, bullet-resistant glass is made from polycarbonate. Trade names for the base material include Armormax, Makroclear, Cyrolon, Lexan and Tuffak. Although it is more shatter-resistant, polycarbonate is more expensive than acrylic, yellows with prolonged exposure to sunlight, and is much more easily scratched. Therefore acrylic is the far better material for most interior and exterior design purposes.

Q: Can acrylic be painted?

A: Yes, you can paint acrylic using, obviously, acrylic paint, inkjet, silkscreen or Laser Engraved.

Q: Does acrylic ‘outgas’ or can it be toxicologically harmful?

A: No – when used for as directed and in ambient temperatures, acrylic does not pose hazardous nor toxicological effects to health. This material has been classified as non-hazardous under OSHA regulations.

Q: Do you accept OEM/ODM?

A: Yes, we accept OEM/ODM, and are able to custom make according to your designs, quantities, and measurements, and also can provide silkscreen, banner painting service etc.

Q: Can I get samples?

A: Yes, we can provide samples as your request with sample fee prepaid. It usually takes 7 days to make one all-acrylic sample; and if the sample is made of a combination of acrylic and wood or metal, it usually takes 7-15 days, if you need it urgently, pls contact us, we will try to prior your sample order.

Q: What’s the Package?

A: We have been producing acrylic products for 9 years, and have plentiful experience in packing and transportation. We guarantee all products will be in 100% good condition to arrive your destination port by sea. If there is damage, our company will replace all the damaged units for sure. If your goods need domestic retail or e-line shopping, pls discuss with us for working out a safe package suitable for inland dispatch.

Q: How long is the Production Lead Time?

A: For small orders (less than USD10000), It takes about 25-30 days ; for a full container order , it takes about 35-40 days ; for bulk mixed order , it takes 45-60 days .

Q: How about the Courier?

A: For reducing courier cost, we suggest all customers choose courier cost prepaid instead of collect. As pre our experience, all collected courier cost in overseas is much higher than the cost prepaid in our local , We have such bad experience before: One US customers wanted to ship 160kgs goods by UPS , we quoted him prepaid courier cost is USD800 . but he offered us his UPS account and insisted do freight collect , then, he got the goods, but UPS ask him to pay USD4150 (UPS official price) for the courier cost , my customer rejected to pay it, which means we have to sustain the huge amount instead. Because UPS state: if the receiver refuse to pay for the freight, the sender is liable for the payment. Since that, we DO NOT accept freight collect when the shipping cost is over USD200 unless your company can entrust the courier come to pick up the package from our factory

Q: What’s the Sea Shipment for 10-18CBM Goods?

A: When the volume of one shipment is between 1018 CBM and not enough for loading a 20ft container, we would like to suggest the customer firstly check the de-vanning it might be very high in some area. Our company may collect a higher FOB cost from buyer accordingly, because some forwarder agency nominated by buyers always charge shipper very high CFS charge and other local charges here, most of time, we have to pay additional USD400 or more to dominated forwarders as FOB fee. For example, we have to pay RMB175/CBM CFS fee sometimes.

Q: What Service can I have?

A: Please check the goods while it’s arrive, if there are some mistakes or damages, pls take pictures and contact our sales right away, we will find you a satisfactory solution. We successfully solved these matters in the past 9 years. So far, we have good relations with more than 10 acrylic products wholesalers in North America, and 3 in South America, 3 in Europe. We hope in the near future, we could have win-win cooperation with more and more importers, wholesalers, distributers and agencies all over the world.