SPC-1006 series polyol is a fully formulated polyol blend, especially developed for the polyurehane rigid foam insulation, applied with metal face sheet or non-metalic face sheet like Mgo, OSB, etc.

It contains sufficient quantity of blowing agent HCFC 141B to achieve the foreseen foam density. When SPC-1006 polyol and isocyanate (MDI) are mixed together using suitable equipment, the good flowability of the resulting foam makes it possible to achieve a homogenous foam density throughout the cross section of the panel. Foams which are allowed to cure for a sufficient time in the mould according to the foam thickness show good adhesion to the surface and good dimensional stability.

SPC-1006 contains sufficient amount of fire retardant for the foreseen applications and the foams obtained by using it together with isocyanate (MDI) are classified as B2 or B3 according to DIN 4201 classification. It is recommended that a mould surface temperature of 40℃ is maintained during production.

SPECIFICATION

COMPONENTS

Component A: polyol

Component B: mdi

PACKAGE

Component A is 200kg/iron drum;

Component B is 250kg/iron drum.

One set: 450 kg=200kg A+250kg B

One 20' container loads 40 sets/80 drums/18 tons

FIRST AID FOR EYES & SKIN

When working, please avoid contact of polyol with eyes or skin. Safety glasses are suggested. Skin contaminated with polyols should be washed with soap and plenty of water. If polyol contacts eyes, flush with plenty of low pressure flowing water and get medical attention.

STORAGE

Moistureproof, ventilation, sealed storage, shelf life of 6 months.