China Supplier Two Component Polyurethane Spray Foam for Insulation

China Supplier Two Component Polyurethane Spray Foam for Insulation

 The product is a mixture consisting of polyether polyols, silicone stabilizer, flame retardant and catalys. It is a light yellow liquid at room temperature. It has been developed to produce B1 class fireproof outer wall spraying thermal insulation polyurethane foam in conjunction with polymeric MDI.

    SPC-1007 series polyol is a fully formulated polyol blend developed for spray application of polyurethane rigid foam. The component ratio of has been adjusted to make it suitable for polyurethane foam spraying machine using with a fixed volumetric component ratio of 1-1.2 : 1. 

    It already contains sufficient quantity of blowing agent HCFC 141b to achieve the foreseen foam density.

Specification of spray foam insulation:

Typical properties of spray foam insulation:

High closed-cell rate, good water-proof

Good thermal insulation

High compressive strength

Component of spray foam insulation:

Component A: polyol

Component B: mdi

First aid for eyes & skin for spray foam :

   When working, please avoid contact of polyol with eyes or skin. Safety glasses are suggested. Skin contaminated with polyols should be washed with soap and plenty of water. If polyol contacts eyes, flush with plenty of low pressure flowing water and get medical attention.

Component A is 220kg/iron drum;

 Component B is 250kg/iron drum.

 One set: 470 kg=220kg A+250kg B

 One 20' container loads 40 sets/80 drums/18.8 tons

Storage for spray foam:

    Moistureproof, ventilation, sealed storage, shelf life of 6 months.

Our Services

 

MS. Emily Lu
QQ: 1780185492
Skype: chinaeps1 
WeChat: Emily19920909 
E-mail: sales (at) puglue (dot) com

              emily (at) puglue (dot) com
Website: