Inline Alkaline Filter Cartridge raise ph alkalinity

Inline Alkaline Filter

Raise alkalinity on RO water!

Raises pH, increases -ORP!
NSF Certified Replacement Filter

The alkaline filter changes the acidic RO water into a perfect natural alkali calcium ionized water.  Gives back minerals such as ionized calcium, magnesium, sodium, potassium. Normally removed by reverse osmosis, now replaced for healthier water
Approximate Dimensions:
12" x 2.5"

An inline alkaline filter that is 2.5 inch in outside diameter and 12" in length with 1/4” FNPT ports. This filter by Hydronix has a service life of one year or 2,000 gallons and a maximum flow rate of 0.5 gpm. The weight of the filter is 1 lb 13 oz.

The filter contains a blend of media: D300 Alkalizing Bio Tablets, D600 anti-oxidant mineral spheres, bio ceramic alkalizer, ORP mineral stone and mineral stones, in addition to sediment pads at entrance and exit of the filter.

The filter re-mineralizes and raises the pH of your purified water by at least 1 to 2 points. By adding this inline filter to a reverse osmosis (RO) system, you get the optimum benefit of the alkaline-mineral-ORP media: a higher pH, higher mineral content, and lower ORP.

The alkaline inline filter is a true alkaline ionized filter that uses premium medias that emit Far Infrared Rays, increases pH, lowers ORP, and gives your water a refreshing mineral flavor.

The alkaline filter is recommended for post RO (Reverse Osmosis) and includes a neodymium magnetic module. It should be placed between the permeate side of the membrane and the RO holding tank