Wenzhou Starlink Industry Automatic Pearl Reviting Machine for 5-6-8-10 mm Diameter

1.use in  costume,shoes,hats,bags,artwares industry to nail the button

2. easy operation and reliable performance

3. High production efficeiency and accurate positioning.

♣ Mixer is suitable for 5, 6, 8, 10 mm diameter all round pearl
♣ Four claw hammer in pieces from above, beads go under automatic feeding, and was extruded and nailed on the materials at the same time;
♣ Pearl through the air supply system, feeding accuracy;
♣ Feeding guide device automatic feeding,no need manual control.
♣ Adopt a new vibration plate device which you need not change it if you change another nail.
This design increase the durability of the machine and extends it's life.
♣ The speed of work ,fixed dynamics and radiance can be adjusted.
♣ You can choose the nail (quadrate or circular),according to your requirement,just need change the die.
♣ Easy operation,it's equal to 6 operator works,what's more,the contact surface does not distort.It is
standard and artistic when counter-buckle.

• The guarantee period for all equipments, accessories and spare parts shall be valid for 12 months since the day the guaranteed capacity of equipment is achieved. (except destructible parts)
• During the guarantee period, if any defect or inherent fault is discovered, the Buyer shall notify the Seller of the defective or faulty parts provided that these involve action to remedy, repair or replace the defective or faulty parts at his own expense within 20 days after receipt of the Buyer's notice by telex/fax.